Online Sale!
100% Guaranteed Genuine Parts
W11509548 Whirlpool Ice Bucket Coupler
Shaft works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Weight : 0.14 lbs
Dimension : 4.02 x 3.23 x 1.50
Compatible Brands
About this product
Shaft works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Weight : 0.14 lbs
Dimension : 4.02 x 3.23 x 1.50
The following parts are replaced by this product
- W10347114
- WPW10347114
Replacing the Whirlpool W11509548 Shaft Seal
Replacing your damaged or worn shaft seal on your Whirlpool W11509548 refrigerator door is an easy DIY repair that can save you time and money. Follow these steps to complete the replacement:
1. Unplug your refrigerator from the wall outlet and shut off the water supply.
2. Open the refrigerator door and locate the shaft seal beneath the door.
3. Use a flathead screwdriver to remove the screws holding the seal in place.
4. Carefully pull the old seal away from the refrigerator door.
5. Measure the size of your old seal and purchase the correct replacement from your local appliance parts store.
6. Clean the area around the door frame with a damp rag before installing the new seal.
7. Place the new seal in the corresponding grooves and align it correctly.
8. Reinstall the screws securely to hold the seal in place.
9. Reconnect your refrigerator to the power source and turn your water supply back on.
10. Close the refrigerator door and check to make sure you have a tight seal.
By following these steps, you can easily and quickly replace the shaft seal on your Whirlpool W11509548 refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your damaged or worn shaft seal on your Whirlpool W11509548 refrigerator door is an easy DIY repair that can save you time and money. Follow these steps to complete the replacement:
1. Unplug your refrigerator from the wall outlet and shut off the water supply.
2. Open the refrigerator door and locate the shaft seal beneath the door.
3. Use a flathead screwdriver to remove the screws holding the seal in place.
4. Carefully pull the old seal away from the refrigerator door.
5. Measure the size of your old seal and purchase the correct replacement from your local appliance parts store.
6. Clean the area around the door frame with a damp rag before installing the new seal.
7. Place the new seal in the corresponding grooves and align it correctly.
8. Reinstall the screws securely to hold the seal in place.
9. Reconnect your refrigerator to the power source and turn your water supply back on.
10. Close the refrigerator door and check to make sure you have a tight seal.
By following these steps, you can easily and quickly replace the shaft seal on your Whirlpool W11509548 refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review