Online Sale!
100% Guaranteed Genuine Parts
154597801 Frigidaire Dishwasher Upper Rack Slide
Start the day off right with the Frigidaire 154597801 SLIDE upper dishrack rail. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
About this product
Start the day off right with the Frigidaire 154597801 SLIDE upper dishrack rail. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The following parts are replaced by this product
- 154232701
Replacing the Frigidaire 154597801 SLIDE GLIDE
1. Unplug the refrigerator from the power source to ensure safety during the repair.
2. Pull the refrigerator away from the wall.
3. Use a putty knife or flathead screwdriver to remove the bottom panel of the refrigerator by prying it off gently.
4. Locate the slide glide, which is a white plastic piece with a square end.
5. Disconnect the wiring harness attached to the slide glide and remove any screws that are holding it in place.
6. Insert the new slide glide into the same spot as the old one, making sure it is aligned correctly.
7. Secure the slide glide with the previously removed screws or new ones if needed.
8. Reconnect the wiring harness to the slide glide.
9. Replace the bottom panel of the refrigerator and press firmly to secure it back in place.
10. Push the refrigerator back up against the wall and plug it back into the power source.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the power source to ensure safety during the repair.
2. Pull the refrigerator away from the wall.
3. Use a putty knife or flathead screwdriver to remove the bottom panel of the refrigerator by prying it off gently.
4. Locate the slide glide, which is a white plastic piece with a square end.
5. Disconnect the wiring harness attached to the slide glide and remove any screws that are holding it in place.
6. Insert the new slide glide into the same spot as the old one, making sure it is aligned correctly.
7. Secure the slide glide with the previously removed screws or new ones if needed.
8. Reconnect the wiring harness to the slide glide.
9. Replace the bottom panel of the refrigerator and press firmly to secure it back in place.
10. Push the refrigerator back up against the wall and plug it back into the power source.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review