100% Guaranteed Genuine Parts
D510190P Speed Queen Dryer Terminal Block Assembly with Screws
Terminal block w/screws assembly works with some Speed Queen, and Amana models of clothes dryers.
Weight : 0.084300 lbs
Dimension : 5.000000 x 1.653500 x 1.417300
Compatible Brands
About this product
Terminal block w/screws assembly works with some Speed Queen, and Amana models of clothes dryers.
Weight : 0.084300 lbs
Dimension : 5.000000 x 1.653500 x 1.417300
The following parts are replaced by this product
- 61923P
- 510190P
- 61923P
How To Replace the D510190P Speed Queen Dryer Terminal Block W/Screws Assembly
1. Unplug the power cord from the wall outlet before attempting to work on the dryer.
2. Remove the screws that attach the terminal block to the dryer cabinet with a screwdriver.
3. Disconnect the wires from the terminal block by pressing down on the wire clamps and pulling off each wire one-by-one.
4. Carefully pull out the old terminal block and set aside.
5. Install the new terminal block in the same way as the old one was removed – making sure each wire is securely fastened and not pinched.
6. Secure the new terminal block with the screws or bolts that were removed in step 2.
7. Reconnect the power cord to the wall outlet.
8. Test the dryer to make sure everything is working properly.
Congratulations, you have successfully replaced the D510190P Speed Queen Dryer Terminal Block W/Screws Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the power cord from the wall outlet before attempting to work on the dryer.
2. Remove the screws that attach the terminal block to the dryer cabinet with a screwdriver.
3. Disconnect the wires from the terminal block by pressing down on the wire clamps and pulling off each wire one-by-one.
4. Carefully pull out the old terminal block and set aside.
5. Install the new terminal block in the same way as the old one was removed – making sure each wire is securely fastened and not pinched.
6. Secure the new terminal block with the screws or bolts that were removed in step 2.
7. Reconnect the power cord to the wall outlet.
8. Test the dryer to make sure everything is working properly.
Congratulations, you have successfully replaced the D510190P Speed Queen Dryer Terminal Block W/Screws Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review