Online Sale!
100% Guaranteed Genuine Parts
WPW10714545 Whirlpool Refrigerator Freezer Door Gasket Seal
The Door Gasket is a grey rubber seal on the inner door panel of your freezer that creates a seal around the door to prevent warm air from entering the freezer compartment. To remove any creases or wrinkles from the new gasket, set it in the sun or hot water for a few minutes. Safely store any food that could deteriorate while the door is open for this repair. To remove the old seal, remove the screws holding in the freezer door and lay it on a flat surface. Use a flat blade screwdriver to pry out the old seal from the door. If you install the gasket and it isn't lying flat with your refrigerator door closed, you can safely mold it with a heat gun--but be careful not to melt it. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Gasket
• Tools Needed: Multi screwdriver, heat gun
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Gasket
• Tools Needed: Multi screwdriver, heat gun
Weight : 5.872000 lbs
Dimension : 31.440000 x 11.190000 x 2.320000
Compatible Brands
About this product
The Door Gasket is a grey rubber seal on the inner door panel of your freezer that creates a seal around the door to prevent warm air from entering the freezer compartment. To remove any creases or wrinkles from the new gasket, set it in the sun or hot water for a few minutes. Safely store any food that could deteriorate while the door is open for this repair. To remove the old seal, remove the screws holding in the freezer door and lay it on a flat surface. Use a flat blade screwdriver to pry out the old seal from the door. If you install the gasket and it isn't lying flat with your refrigerator door closed, you can safely mold it with a heat gun--but be careful not to melt it. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Gasket
• Tools Needed: Multi screwdriver, heat gun
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Door Gasket
• Tools Needed: Multi screwdriver, heat gun
Weight : 5.872000 lbs
Dimension : 31.440000 x 11.190000 x 2.320000
The following parts are replaced by this product
- W10191103
- W10164045
- W10443322
- W10714545
No more associated models for this part.
DIY: How to Replace the WPW10714545 Whirlpool Refrigerator Freezer Door Seal Gasket
1. Prepare the tools you will need including a putty knife, flathead screwdriver, Phillips head screwdriver, tools to measure and mark, and a replacement seal gasket (WPW10714545).
2. Unplug your refrigerator or shut off the power at the circuit breaker before starting the replacement process.
3. Open the refrigerator door and inspect the seal gasket for any signs of damage or wear.
4. If the seal gasket is damaged or worn, use a putty knife to carefully remove it from the door frame.
5. Use a measuring tool to measure the length and width of the old seal gasket, and mark these dimensions on the new seal gasket for installation.
6. Remove any excess material from the edges of the new seal gasket, if needed.
7. Install the new seal gasket in place, using a flathead screwdriver to carefully secure the screws in the predrilled holes.
8. Carefully press the seal gasket onto the door frame to create a tight seal.
9. Once the seal gasket has been installed, plug your refrigerator back in or turn the power back on at the circuit breaker.
10. Test the seal gasket by opening and closing the refrigerator door to ensure the seal is tight and effective.
By following these simple steps, you can replace the WPW10714545 Whirlpool Refrigerator Freezer Door Seal Gasket quickly and easily. This DIY project will help keep your refrigerator running efficiently and your food safe and fresh for longer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Prepare the tools you will need including a putty knife, flathead screwdriver, Phillips head screwdriver, tools to measure and mark, and a replacement seal gasket (WPW10714545).
2. Unplug your refrigerator or shut off the power at the circuit breaker before starting the replacement process.
3. Open the refrigerator door and inspect the seal gasket for any signs of damage or wear.
4. If the seal gasket is damaged or worn, use a putty knife to carefully remove it from the door frame.
5. Use a measuring tool to measure the length and width of the old seal gasket, and mark these dimensions on the new seal gasket for installation.
6. Remove any excess material from the edges of the new seal gasket, if needed.
7. Install the new seal gasket in place, using a flathead screwdriver to carefully secure the screws in the predrilled holes.
8. Carefully press the seal gasket onto the door frame to create a tight seal.
9. Once the seal gasket has been installed, plug your refrigerator back in or turn the power back on at the circuit breaker.
10. Test the seal gasket by opening and closing the refrigerator door to ensure the seal is tight and effective.
By following these simple steps, you can replace the WPW10714545 Whirlpool Refrigerator Freezer Door Seal Gasket quickly and easily. This DIY project will help keep your refrigerator running efficiently and your food safe and fresh for longer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review