W11024089 Whirlpool Refrigerator Evaporator Fan Motor
This SxS Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh foods compartment of your refrigerator. You'll need to replace this part if it has shorted out and is no longer cooling the appliance properly. When the evaporator fan fails, it often generates a lot of noise in the freezer area. Note that to access the part, you'll have to remove the shelving from the freezer and the inside back panel. This part also includes an adapter wire, which you may need to use during the installation depending on the design of your appliance. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This SxS Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh foods compartment of your refrigerator. You'll need to replace this part if it has shorted out and is no longer cooling the appliance properly. When the evaporator fan fails, it often generates a lot of noise in the freezer area. Note that to access the part, you'll have to remove the shelving from the freezer and the inside back panel. This part also includes an adapter wire, which you may need to use during the installation depending on the design of your appliance. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- 13062901
- WP13062901
Replacing the Whirlpool Refrigerator Evaporator Fan Motor (W11024089)
Are you hearing a loud buzzing noise coming from your fridge? It might be time to replace your evaporator fan motor. This motor is responsible for circulating cold air in the refrigerator, and when it fails the fridge temperature may rise. Follow this DIY guide to replace the evaporator fan motor (W11024089) in your Whirlpool refrigerator.
Tools Needed:
-Phillips screwdriver
-Flathead screwdriver
-Needle nose pliers
-Nut driver
-New W11024089 evaporator fan motor
Step 1: Unplug Your Refrigerator
Before beginning, make sure that you have unplugged the refrigerator from its power source. This will ensure your safety and prevent the risk of electric shock.
Step 2: Remove the Lower Grill Panel
Use a Phillips screwdriver to unscrew the lower grill panel from the bottom of the refrigerator. Remove the panel, then set it aside.
Step 3: Take Off the Evaporator Cover
Using a flathead screwdriver, carefully pry off the evaporator cover. Make sure not to damage the plastic clips that secure the cover in place. Once the cover is removed, you should see the evaporator fan motor.
Step 4: Disconnect the Motor Wires
Use needle nose pliers to disconnect the wires from the motor. Be sure to note the placement of the wires before disconnecting them.
Step 5: Unscrew the Old Motor
Using a nut driver, unscrew the four screws that hold the old motor in place. After the screws are removed, carefully pull out the motor and set it aside.
Step 6: Install the New Motor
Take the new motor and insert it into the same opening where the old one was removed from. Make sure it is securely in place before continuing to the next step.
Step 7: Screw in the New Motor
Screw in the four screws that will hold the new motor in place using the nut driver.
Step 8: Reconnect the Motor Wires
Connect the wires to the new motor, making sure to place them in the same spot as the old ones.
Step 9: Replace the Evaporator Cover
Carefully place the evaporator cover back in its original position and secure it with the flathead screwdriver.
Step 10: Replace the Lower Grille Panel
Replace the lower grille panel and secure it with the Phillips screwdriver.
Step 11: Plug In the Refrigerator
Once everything has been completed, plug the refrigerator back in and test to make sure that the fan motor is working properly.
You’ve successfully replaced the Whirlpool refrigerator evaporator fan motor (W11024089)! With a little bit of patience, elbow grease, and the right tools you can maintain your refrigerator and keep it running in tip top shape.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you hearing a loud buzzing noise coming from your fridge? It might be time to replace your evaporator fan motor. This motor is responsible for circulating cold air in the refrigerator, and when it fails the fridge temperature may rise. Follow this DIY guide to replace the evaporator fan motor (W11024089) in your Whirlpool refrigerator.
Tools Needed:
-Phillips screwdriver
-Flathead screwdriver
-Needle nose pliers
-Nut driver
-New W11024089 evaporator fan motor
Step 1: Unplug Your Refrigerator
Before beginning, make sure that you have unplugged the refrigerator from its power source. This will ensure your safety and prevent the risk of electric shock.
Step 2: Remove the Lower Grill Panel
Use a Phillips screwdriver to unscrew the lower grill panel from the bottom of the refrigerator. Remove the panel, then set it aside.
Step 3: Take Off the Evaporator Cover
Using a flathead screwdriver, carefully pry off the evaporator cover. Make sure not to damage the plastic clips that secure the cover in place. Once the cover is removed, you should see the evaporator fan motor.
Step 4: Disconnect the Motor Wires
Use needle nose pliers to disconnect the wires from the motor. Be sure to note the placement of the wires before disconnecting them.
Step 5: Unscrew the Old Motor
Using a nut driver, unscrew the four screws that hold the old motor in place. After the screws are removed, carefully pull out the motor and set it aside.
Step 6: Install the New Motor
Take the new motor and insert it into the same opening where the old one was removed from. Make sure it is securely in place before continuing to the next step.
Step 7: Screw in the New Motor
Screw in the four screws that will hold the new motor in place using the nut driver.
Step 8: Reconnect the Motor Wires
Connect the wires to the new motor, making sure to place them in the same spot as the old ones.
Step 9: Replace the Evaporator Cover
Carefully place the evaporator cover back in its original position and secure it with the flathead screwdriver.
Step 10: Replace the Lower Grille Panel
Replace the lower grille panel and secure it with the Phillips screwdriver.
Step 11: Plug In the Refrigerator
Once everything has been completed, plug the refrigerator back in and test to make sure that the fan motor is working properly.
You’ve successfully replaced the Whirlpool refrigerator evaporator fan motor (W11024089)! With a little bit of patience, elbow grease, and the right tools you can maintain your refrigerator and keep it running in tip top shape.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
