WP3406107 Whirlpool Dryer Door Switch
This Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If your dryer does not start as expected, replacing this part may alleviate the issue. Note that this part also replaces older 2-terminal switches. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If your dryer does not start as expected, replacing this part may alleviate the issue. Note that this part also replaces older 2-terminal switches. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Write Your Own Review
The following parts are replaced by this product
- 3406101
- 3406107
- 3405100
- 3405101
- DE6107
- W10569603
- WPW10569603
- DE6107
- WP3406107VP
DIY Instructions for Replacing a WP3406107 Whirlpool Dryer Door Switch
1. Unplug the dryer from the wall socket before you begin any work.
2. Open the dryer door and locate the two screws at the top of the switch that holds it in place.
3. Using a Phillips screwdriver, remove the screws and set them aside.
4. Gently pull the switch away from the door and locate the two wires connected to it.
5. Disconnect the wires by gently pulling them off the terminals on the old switch.
6. Put the wires onto the same terminals on the new switch.
7. Secure the new switch in place by replacing the two screws.
8. Tuck the wires into the dryer cabinet and replace the dryer door.
9. Plug the dryer back into the wall socket and test the switch.
These simple steps will help you easily replace a Whirlpool dryer door switch, model WP3406107. Always remember to unplug the dryer before beginning any DIY repairs.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the dryer from the wall socket before you begin any work.
2. Open the dryer door and locate the two screws at the top of the switch that holds it in place.
3. Using a Phillips screwdriver, remove the screws and set them aside.
4. Gently pull the switch away from the door and locate the two wires connected to it.
5. Disconnect the wires by gently pulling them off the terminals on the old switch.
6. Put the wires onto the same terminals on the new switch.
7. Secure the new switch in place by replacing the two screws.
8. Tuck the wires into the dryer cabinet and replace the dryer door.
9. Plug the dryer back into the wall socket and test the switch.
These simple steps will help you easily replace a Whirlpool dryer door switch, model WP3406107. Always remember to unplug the dryer before beginning any DIY repairs.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
