Online Sale!
100% Guaranteed Genuine Parts
WP8564458 Whirlpool Absorber
Whirlpool WP8564458 ABSORBER WASHER SOUND. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.102800 lbs
Dimension : 5.629900 x 3.582600 x 0.708600
Compatible Brands
About this product
Whirlpool WP8564458 ABSORBER WASHER SOUND. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.102800 lbs
Dimension : 5.629900 x 3.582600 x 0.708600
The following parts are replaced by this product
- 8564458
No more associated models for this part.
Replacing the Whirlpool WP8564458 ABSORBER
DIY Instructions:
1. Turn off the power to the appliance and disconnect it from the wall.
2. Remove the front panel of the appliance by unscrewing the screws that surround the edges of the panel.
3. Locate the Whirlpool WP8564458 absorber. This part is typically located in the back of the appliance near the condenser coil.
4. Unscrew the screws that are securing the absorber to the cabinet.
5. Gently pull the absorber out of the cabinet and discard the old part.
6. Insert the new Whirlpool WP8564458 absorber into the cabinet.
7. Secure the absorber with the screws that were removed earlier.
8. Replace the front panel of the appliance and screw it back into place.
9. Reconnect the power to the appliance and turn it on.
10. Test the appliance to make sure that it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions:
1. Turn off the power to the appliance and disconnect it from the wall.
2. Remove the front panel of the appliance by unscrewing the screws that surround the edges of the panel.
3. Locate the Whirlpool WP8564458 absorber. This part is typically located in the back of the appliance near the condenser coil.
4. Unscrew the screws that are securing the absorber to the cabinet.
5. Gently pull the absorber out of the cabinet and discard the old part.
6. Insert the new Whirlpool WP8564458 absorber into the cabinet.
7. Secure the absorber with the screws that were removed earlier.
8. Replace the front panel of the appliance and screw it back into place.
9. Reconnect the power to the appliance and turn it on.
10. Test the appliance to make sure that it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review