WP7432P109-60 Whirlpool Oven Ignitor
Part #: WPL WP7432P109-60
Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Caloric Gaffers and Sattler Magic Chef Norge Sears Kenmore Admiral Range Cook Top Burner Igniter 7432P109-60
We are an Authorized Parts Distributor for Whirlpool call us today for all of your Whirlpool appliance parts.
We are an Authorized Parts Distributor for Whirlpool call us today for all of your Whirlpool appliance parts.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Caloric Gaffers and Sattler Magic Chef Norge Sears Kenmore Admiral Range Cook Top Burner Igniter 7432P109-60
We are an Authorized Parts Distributor for Whirlpool call us today for all of your Whirlpool appliance parts.
We are an Authorized Parts Distributor for Whirlpool call us today for all of your Whirlpool appliance parts.
Write Your Own Review
The following parts are replaced by this product
- 71002724
- 7432P109-60
DIY Guide for Replacing a Whirlpool Oven Ignitor (WP7432P109-60)
Replacing a Whirlpool oven ignitor (WP7432P109-60) can be a challenging task. Fortunately, with the right tools and information, anyone can do it safely and with ease. This DIY guide will provide the detailed steps needed to replace your Whirlpool oven ignitor, including safety tips and how to find replacement parts.
What You Will Need:
• Safety Goggles
• Flashlight
• Screwdriver
• Replacement Ignitor (Model WP7432P109-60)
Step 1: Shut off power to the oven. Before doing any work on your oven, make sure the power is shut off at both the breaker and the wall switch.
Step 2: Remove the oven door. Depending on the model of your oven, you may need a screwdriver to remove the screws that secure the oven door. Make sure to set aside any screws as you will need to reattach the door after the ignitor has been replaced.
Step 3: Locate the old ignitor. Once the door is off, you can access the back panel of the oven. Inside the back panel, you should see the existing ignitor. It may be difficult to reach, so pull out the oven racks and use a flashlight to help you find it.
Step 4: Remove the old ignitor. Using a screwdriver, unscrew the bolts that secure the ignitor in place. Then, carefully pull the ignitor out of the oven.
Step 5: Install the new ignitor. Next, take your replacement ignitor (Model WP7432P109-60) and insert it into the oven. Secure the ignitor with the bolts.
Step 6: Replace the oven door. Once the ignitor is secured in place, you can reattach the oven door. Make sure to get the screws back in place and tighten them securely.
Step 7: Turn on the oven power. Finally, turn the power back on at both the breaker and wall switch. Test out your new ignitor to make sure it is working properly.
You’ve now successfully replaced your Whirlpool oven ignitor! With a few simple repairs, you can get your oven back up and running again in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a Whirlpool oven ignitor (WP7432P109-60) can be a challenging task. Fortunately, with the right tools and information, anyone can do it safely and with ease. This DIY guide will provide the detailed steps needed to replace your Whirlpool oven ignitor, including safety tips and how to find replacement parts.
What You Will Need:
• Safety Goggles
• Flashlight
• Screwdriver
• Replacement Ignitor (Model WP7432P109-60)
Step 1: Shut off power to the oven. Before doing any work on your oven, make sure the power is shut off at both the breaker and the wall switch.
Step 2: Remove the oven door. Depending on the model of your oven, you may need a screwdriver to remove the screws that secure the oven door. Make sure to set aside any screws as you will need to reattach the door after the ignitor has been replaced.
Step 3: Locate the old ignitor. Once the door is off, you can access the back panel of the oven. Inside the back panel, you should see the existing ignitor. It may be difficult to reach, so pull out the oven racks and use a flashlight to help you find it.
Step 4: Remove the old ignitor. Using a screwdriver, unscrew the bolts that secure the ignitor in place. Then, carefully pull the ignitor out of the oven.
Step 5: Install the new ignitor. Next, take your replacement ignitor (Model WP7432P109-60) and insert it into the oven. Secure the ignitor with the bolts.
Step 6: Replace the oven door. Once the ignitor is secured in place, you can reattach the oven door. Make sure to get the screws back in place and tighten them securely.
Step 7: Turn on the oven power. Finally, turn the power back on at both the breaker and wall switch. Test out your new ignitor to make sure it is working properly.
You’ve now successfully replaced your Whirlpool oven ignitor! With a few simple repairs, you can get your oven back up and running again in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.