Online Sale!
100% Guaranteed Genuine Parts
W11126052 Whirlpool Screw
W11126052 Whirlpool Screw
Weight : 0.007200 lbs
Dimension : 0.750000 x 0.250000 x 0.800000
Compatible Brands
About this product
W11126052 Whirlpool Screw
Weight : 0.007200 lbs
Dimension : 0.750000 x 0.250000 x 0.800000
The following parts are replaced by this product
- W10731474
No more associated models for this part.
Replacing the Whirlpool W11126052 Screw
Step 1 – Prepare to Replace the Screw
Start by gathering all the necessary materials and tools, such as a screwdriver or drill with a bit that matches the size of the screw, depending on the type of screw.
Step 2 – Remove the Old Screw
Using the appropriate screwdriver, unscrew the old Whirlpool W11126052 screw until it’s completely out of its mounting hole.
Step 3 – Insert New Screw
Insert a new Whirlpool W11126052 screw into the same hole that the old screw was in. Make sure the screw is inserted properly, so that it fits securely.
Step 4 – Secure the New Screw
Using the appropriate screwdriver, tighten the new Whirlpool W11126052 screw until it’s snugly secured in place.
Step 5 – Test the Screw
After replacing the screw, test it to make sure it’s securely in place. If any part of the screw appears to be loose, tighten it again before testing.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1 – Prepare to Replace the Screw
Start by gathering all the necessary materials and tools, such as a screwdriver or drill with a bit that matches the size of the screw, depending on the type of screw.
Step 2 – Remove the Old Screw
Using the appropriate screwdriver, unscrew the old Whirlpool W11126052 screw until it’s completely out of its mounting hole.
Step 3 – Insert New Screw
Insert a new Whirlpool W11126052 screw into the same hole that the old screw was in. Make sure the screw is inserted properly, so that it fits securely.
Step 4 – Secure the New Screw
Using the appropriate screwdriver, tighten the new Whirlpool W11126052 screw until it’s snugly secured in place.
Step 5 – Test the Screw
After replacing the screw, test it to make sure it’s securely in place. If any part of the screw appears to be loose, tighten it again before testing.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review