Online Sale!
100% Guaranteed Genuine Parts
W11088181 Whirlpool Surface Element Switch
This Range Element Control Switch turns the surface element on and off and controls how much heat the element produces. To access the part, you'll need to remove the back panel of the range. Depending upon your model, you may not have the same terminal blocks and you may need to swap out your wires one at a time. This infinite control switch is a double flat shaft, screw mount switch. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Control Switch
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Control Switch
• Tools Needed: Multi screwdriver
Weight : 0.175600 lbs
Dimension : 4.212500 x 3.346400 x 1.732200
Compatible Brands
About this product
This Range Element Control Switch turns the surface element on and off and controls how much heat the element produces. To access the part, you'll need to remove the back panel of the range. Depending upon your model, you may not have the same terminal blocks and you may need to swap out your wires one at a time. This infinite control switch is a double flat shaft, screw mount switch. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Control Switch
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Control Switch
• Tools Needed: Multi screwdriver
Weight : 0.175600 lbs
Dimension : 4.212500 x 3.346400 x 1.732200
The following parts are replaced by this product
- 71001166
- 71001166
No more associated models for this part.
Replacing the Whirlpool W11088181 SWITCH-INF
DIY Instructions:
1. Unplug your appliance from the wall outlet and turn it off.
2. Gently lift up on the control panel to access and remove the old switch.
3. Carefully remove the wiring harness from the old switch and note how it’s connected.
4. Take the new Whirlpool W11088181 switch, and connect the wiring harness to the same pins as before.
5. Re-install the new switch and secure it with the included mounting screws.
6. Reconnect the appliance to the power outlet and turn on.
7. Test the switch to make sure it’s working properly.
Congratulations! You just successfully replaced the Whirlpool W11088181 switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions:
1. Unplug your appliance from the wall outlet and turn it off.
2. Gently lift up on the control panel to access and remove the old switch.
3. Carefully remove the wiring harness from the old switch and note how it’s connected.
4. Take the new Whirlpool W11088181 switch, and connect the wiring harness to the same pins as before.
5. Re-install the new switch and secure it with the included mounting screws.
6. Reconnect the appliance to the power outlet and turn on.
7. Test the switch to make sure it’s working properly.
Congratulations! You just successfully replaced the Whirlpool W11088181 switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review