Online Sale!
100% Guaranteed Genuine Parts
131724301 Frigidaire Dryer Drum Bearing Bracket
131724301 Frigidaire Dryer Drum Bearing Bracket
Weight : 0.110500 lbs
Dimension : 4.488100 x 3.779500 x 0.905500
About this product
131724301 Frigidaire Dryer Drum Bearing Bracket
Weight : 0.110500 lbs
Dimension : 4.488100 x 3.779500 x 0.905500
The following parts are replaced by this product
- 131724300
- 5303281023
Replacing a 131724301 Frigidaire Dryer Drum Bearing Bracket
Tools You Will Need:
- Phillips head screwdriver
- Flat head screwdriver
- Replacement 131724301 Frigidaire Dryer drum bearing bracket
Instructions:
1. Unplug the dryer from the wall.
2. Remove the back panel with a Phillips head screwdriver.
3. Locate the 131724301 Frigidaire Dryer drum bearing bracket.
4. Unscrew the bracket from the interior of the dryer with a flat head screwdriver.
5. Carefully remove the bracket from the dryer and discard it.
6. Place the replacement 131724301 Frigidaire Dryer drum bearing bracket in the same location as the old one.
7. Secure the new bracket in place with the Phillips head screwdriver.
8. Replace the back panel.
9. Plug the dryer back into the wall.
10. Test the dryer to ensure that the bearing bracket is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools You Will Need:
- Phillips head screwdriver
- Flat head screwdriver
- Replacement 131724301 Frigidaire Dryer drum bearing bracket
Instructions:
1. Unplug the dryer from the wall.
2. Remove the back panel with a Phillips head screwdriver.
3. Locate the 131724301 Frigidaire Dryer drum bearing bracket.
4. Unscrew the bracket from the interior of the dryer with a flat head screwdriver.
5. Carefully remove the bracket from the dryer and discard it.
6. Place the replacement 131724301 Frigidaire Dryer drum bearing bracket in the same location as the old one.
7. Secure the new bracket in place with the Phillips head screwdriver.
8. Replace the back panel.
9. Plug the dryer back into the wall.
10. Test the dryer to ensure that the bearing bracket is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review