28800P Speed Queen Idler Pulley Wheel
The 28800P Speed Queen / Alliance Washer Idler Pulley Wheel is designed to provide the power and performance you need to get your laundry done right. Get your washer running again in no time!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The 28800P Speed Queen / Alliance Washer Idler Pulley Wheel is designed to provide the power and performance you need to get your laundry done right. Get your washer running again in no time!
Write Your Own Review
The following parts are replaced by this product
- 28800
- WP28800
DIY Guide to Replacing the 28800P Speed Queen/Alliance Washer Idler Pulley Wheel
Replacing your Speed Queen/Alliance washer's idler pulley wheel is an easy job that anyone can do. This guide will take you through the steps to safely and effectively replace this part of your washing machine.
1. Safety precautions:
Before you begin, make sure to turn off the power to the washer and unplug it from the outlet. Use safety gloves when dealing with parts and components to avoid the risk of injury.
2. Open the washer panels:
Using the appropriate screwdriver (such as a Phillips head or a flat head screwdriver) remove the back cover, as well as the top cover of your washer. Set these aside securely in an area where they will not be disturbed during the repair.
3. Remove the old pulley wheel:
Once the covers have been removed, locate the idler pulley wheel. It is usually found towards the middle of the washer, attached to a bracket. Use the appropriate sized wrench to loosen the nut that holds the pulley wheel in place. Once you’ve loosened the nut, carefully remove the old pulley wheel from its location.
4. Install the new pulley wheel:
Take the new pulley wheel and attach it to the bracket using the same nut that was used for the old pulley. Make sure to tighten the nut securely, but not too tight, to make sure it does not come loose again.
5. Replace the washer covers:
Once the pulley is in place you can replace the washer’s covers. Line the panels up correctly and secure them in place with the screws that you removed earlier.
6. Test the washer:
Turn the power back on to the washer, plug it back into the outlet, and test it out. If it is running properly with no issues, then the repair is complete.
By following these easy steps, you should have successfully replaced the 28800P Speed Queen / Alliance Washer Idler Pulley Wheel.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your Speed Queen/Alliance washer's idler pulley wheel is an easy job that anyone can do. This guide will take you through the steps to safely and effectively replace this part of your washing machine.
1. Safety precautions:
Before you begin, make sure to turn off the power to the washer and unplug it from the outlet. Use safety gloves when dealing with parts and components to avoid the risk of injury.
2. Open the washer panels:
Using the appropriate screwdriver (such as a Phillips head or a flat head screwdriver) remove the back cover, as well as the top cover of your washer. Set these aside securely in an area where they will not be disturbed during the repair.
3. Remove the old pulley wheel:
Once the covers have been removed, locate the idler pulley wheel. It is usually found towards the middle of the washer, attached to a bracket. Use the appropriate sized wrench to loosen the nut that holds the pulley wheel in place. Once you’ve loosened the nut, carefully remove the old pulley wheel from its location.
4. Install the new pulley wheel:
Take the new pulley wheel and attach it to the bracket using the same nut that was used for the old pulley. Make sure to tighten the nut securely, but not too tight, to make sure it does not come loose again.
5. Replace the washer covers:
Once the pulley is in place you can replace the washer’s covers. Line the panels up correctly and secure them in place with the screws that you removed earlier.
6. Test the washer:
Turn the power back on to the washer, plug it back into the outlet, and test it out. If it is running properly with no issues, then the repair is complete.
By following these easy steps, you should have successfully replaced the 28800P Speed Queen / Alliance Washer Idler Pulley Wheel.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
