WB23X5340 GE Oven Oven Sensor Heat Probe Assembly
GE General Electric Hotpoint Sears Kenmore Stove Range Oven SENSOR HEAT PROBE ASSEMBLY WB23X5340
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE General Electric Hotpoint Sears Kenmore Stove Range Oven SENSOR HEAT PROBE ASSEMBLY WB23X5340
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- WB23T10002
- WB20K5035
Replacing the GE Stove Range Oven SENSOR HEAT PROBE ASSEMBLY
DIY Step-by-Step Instructions
1. Turn your oven off and unplug it from the wall.
2. Open the oven door, and locate the heat sensor probe.
3. Gently pull the sensor heat probe out of its socket.
4. Remove the two screws fastening the SENSOR HEAT PROBE ASSEMBLY to the oven.
5. Disconnect the wiring harness from the SENSOR HEAT PROBE ASSEMBLY.
6. Re-connect the wiring harness to the new SENSOR HEAT PROBE ASSEMBLY.
7. Place the new SENSOR HEAT PROBE ASSEMBLY in the socket and secure it with the two screws.
8. Plug the oven back into the wall, and turn it on.
9. Test the oven by setting the desired temperature and check that the oven heat is correct.
You have now successfully replaced the GE Stove Range Oven SENSOR HEAT PROBE ASSEMBLY!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Step-by-Step Instructions
1. Turn your oven off and unplug it from the wall.
2. Open the oven door, and locate the heat sensor probe.
3. Gently pull the sensor heat probe out of its socket.
4. Remove the two screws fastening the SENSOR HEAT PROBE ASSEMBLY to the oven.
5. Disconnect the wiring harness from the SENSOR HEAT PROBE ASSEMBLY.
6. Re-connect the wiring harness to the new SENSOR HEAT PROBE ASSEMBLY.
7. Place the new SENSOR HEAT PROBE ASSEMBLY in the socket and secure it with the two screws.
8. Plug the oven back into the wall, and turn it on.
9. Test the oven by setting the desired temperature and check that the oven heat is correct.
You have now successfully replaced the GE Stove Range Oven SENSOR HEAT PROBE ASSEMBLY!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
