Online Sale!
100% Guaranteed Genuine Parts
WP8563965 Whirlpool Hinge Assembly
WP8563965 Whirlpool Hinge
Weight : 0.107200 lbs
Dimension : 4.803100 x 3.582600 x 0.866100
Compatible Brands
About this product
WP8563965 Whirlpool Hinge
Weight : 0.107200 lbs
Dimension : 4.803100 x 3.582600 x 0.866100
The following parts are replaced by this product
- 8563965
No more associated models for this part.
DIY Guide: How to Replace the Whirlpool WP8563965 HINGE
Replacing the Whirlpool WP8563965 Hinge is a simple DIY project that can help extend the life of your appliance and improve its performance. This guide will provide step-by-step instructions for replacing this hinge.
Materials Needed:
• New Whirlpool WP8563965 Hinge
• Flathead or Phillips head screwdriver
• Portable drill with various drill bits
• Pliers
• Safety goggles
Instructions:
1. Begin by unplugging the appliance from the wall outlet to avoid any possible electric shocks.
2. Carefully inspect the old hinge and take note of how it is attached so you can replicate the same attachment process with the new hinge.
3. Using the appropriate screwdriver, loosen and remove the screws that secure the old hinge in place.
4. Remove the old hinge by carefully pulling it away from the appliance.
5. Position the new Whirlpool WP8563965 Hinge over the corresponding location on the appliance. Mark where each screw hole will need to be drilled.
6. Use the portable drill and applicable bit to create the screw holes for the new hinge.
7. Place the new hinge into position and use the screwdriver to secure it in place.
8. Double-check that the hinge is firmly secured and then reattach the appliance to the wall outlet.
9. Test the new hinge to ensure it is properly functioning.
Congratulations! You've just successfully replaced the Whirlpool WP8563965 Hinge.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool WP8563965 Hinge is a simple DIY project that can help extend the life of your appliance and improve its performance. This guide will provide step-by-step instructions for replacing this hinge.
Materials Needed:
• New Whirlpool WP8563965 Hinge
• Flathead or Phillips head screwdriver
• Portable drill with various drill bits
• Pliers
• Safety goggles
Instructions:
1. Begin by unplugging the appliance from the wall outlet to avoid any possible electric shocks.
2. Carefully inspect the old hinge and take note of how it is attached so you can replicate the same attachment process with the new hinge.
3. Using the appropriate screwdriver, loosen and remove the screws that secure the old hinge in place.
4. Remove the old hinge by carefully pulling it away from the appliance.
5. Position the new Whirlpool WP8563965 Hinge over the corresponding location on the appliance. Mark where each screw hole will need to be drilled.
6. Use the portable drill and applicable bit to create the screw holes for the new hinge.
7. Place the new hinge into position and use the screwdriver to secure it in place.
8. Double-check that the hinge is firmly secured and then reattach the appliance to the wall outlet.
9. Test the new hinge to ensure it is properly functioning.
Congratulations! You've just successfully replaced the Whirlpool WP8563965 Hinge.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review