Online Sale!
100% Guaranteed Genuine Parts
WP3406105 Whirlpool Door Switch
The Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If the door handle is broken or your dryer does not start as expected, then replacing the door switch may alleviate these issues. Note that this part also replaces older 2-terminal switches. To access the part, remove the screws from the lint screen if necessary and use a putty knife to release the tabs holding the top panel of the dryer on. The door switch is located in the upper corner of the dryer next to the switch actuator. The new switch may have an extra wire that isn't used. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: A multimeter can be used to test the door switch for continuity before you begin this repair.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Weight : 0.191200 lbs
Dimension : 8.976300 x 1.929100 x 1.535400
Compatible Brands
About this product
The Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If the door handle is broken or your dryer does not start as expected, then replacing the door switch may alleviate these issues. Note that this part also replaces older 2-terminal switches. To access the part, remove the screws from the lint screen if necessary and use a putty knife to release the tabs holding the top panel of the dryer on. The door switch is located in the upper corner of the dryer next to the switch actuator. The new switch may have an extra wire that isn't used. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: A multimeter can be used to test the door switch for continuity before you begin this repair.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Door Switch Assembly
• Tools Needed: Phillips-Head screwdriver, putty knife
Weight : 0.191200 lbs
Dimension : 8.976300 x 1.929100 x 1.535400
The following parts are replaced by this product
- 3406105
- 3406104
No more associated models for this part.
1. Begin by turning off the power to the appliance, either at the breaker box or by unplugging the unit.
2. Open the appliance door and locate the Whirlpool WP3406105 switch-door. It is often located in the upper left corner of the appliance's interior.
3. Carefully remove the screws holding the switch-door in place.
4. Gently pull the switch-door away from the appliance, taking care not to damage the wires connected to it.
5. Disconnect the wires from the old switch-door.
6. Connect the wires to the new switch-door.
7. Place the new switch-door in the appropriate location, making sure it is correctly aligned.
8. Secure the new switch-door with the screws.
9. Test the switch-door to ensure it is installed correctly and working properly.
10. Turn on the power to the appliance and enjoy your newly replaced Whirlpool WP3406105 switch-door!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open the appliance door and locate the Whirlpool WP3406105 switch-door. It is often located in the upper left corner of the appliance's interior.
3. Carefully remove the screws holding the switch-door in place.
4. Gently pull the switch-door away from the appliance, taking care not to damage the wires connected to it.
5. Disconnect the wires from the old switch-door.
6. Connect the wires to the new switch-door.
7. Place the new switch-door in the appropriate location, making sure it is correctly aligned.
8. Secure the new switch-door with the screws.
9. Test the switch-door to ensure it is installed correctly and working properly.
10. Turn on the power to the appliance and enjoy your newly replaced Whirlpool WP3406105 switch-door!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review