Online Sale!
100% Guaranteed Genuine Parts
WP2305258 Whirlpool Dispenser Door Assembly
WP2305258 Whirlpool Dispenser Door
Weight : 0.253600 lbs
Dimension : 4.060000 x 3.780000 x 2.280000
Compatible Brands
About this product
WP2305258 Whirlpool Dispenser Door
Weight : 0.253600 lbs
Dimension : 4.060000 x 3.780000 x 2.280000
The following parts are replaced by this product
- 2305258
No more associated models for this part.
Replacing the Whirlpool WP2305258 DOOR-CHUTE CATCH
This step-by-step guide will show you how to easily replace the door-chute catch of your Whirlpool WP2305258.
Tools Needed:
-Phillips head screwdriver
-Putty knife or flathead screwdriver
-Replacement door-chute catch (Whirlpool WP2305258)
Instructions:
1. Disconnect the power source to the appliance. This can be done either by unplugging the cord from the wall socket or tripping the circuit breaker.
2. Unscrew the old door-chute catch using a Phillips head screwdriver.
3. Carefully remove the old chute catch using a putty knife or flathead screwdriver. You may need to use some force as it may be stuck in place.
4. Insert the new door-chute catch into the opening and make sure it is flush with the door.
5. Secure the new door-chute catch in place by tightly screwing the Phillips head screws back in.
6. Reconnect the power source to the appliance.
7. Test the door-chute catch to ensure it is installed correctly and works properly.
Your Whirlpool WP2305258 door-chute catch is now successfully replaced!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This step-by-step guide will show you how to easily replace the door-chute catch of your Whirlpool WP2305258.
Tools Needed:
-Phillips head screwdriver
-Putty knife or flathead screwdriver
-Replacement door-chute catch (Whirlpool WP2305258)
Instructions:
1. Disconnect the power source to the appliance. This can be done either by unplugging the cord from the wall socket or tripping the circuit breaker.
2. Unscrew the old door-chute catch using a Phillips head screwdriver.
3. Carefully remove the old chute catch using a putty knife or flathead screwdriver. You may need to use some force as it may be stuck in place.
4. Insert the new door-chute catch into the opening and make sure it is flush with the door.
5. Secure the new door-chute catch in place by tightly screwing the Phillips head screws back in.
6. Reconnect the power source to the appliance.
7. Test the door-chute catch to ensure it is installed correctly and works properly.
Your Whirlpool WP2305258 door-chute catch is now successfully replaced!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review