Online Sale!
100% Guaranteed Genuine Parts
WP2208954 Whirlpool Door Shelf Support
WP2208954 Whirlpool Door Shelf Support
Weight : 0.086300 lbs
Dimension : 3.500000 x 2.500000 x 0.500000
Compatible Brands
About this product
WP2208954 Whirlpool Door Shelf Support
Weight : 0.086300 lbs
Dimension : 3.500000 x 2.500000 x 0.500000
The following parts are replaced by this product
- 2208954
DIY Instructions to Replace a Whirlpool WP2208954 Endcap-TRM
1. Unplug the refrigerator. This is to ensure your safety and avoid electric shock while working on it.
2. Locate the parts. The Whirlpool WP2208954 Endcap-TRM is located at the back of the refrigerator.
3. Remove the existing part. Carefully remove the part by unscrewing the screws that are attached to it.
4. Inspect for damage. Check for any signs of wear and tear or damage to the part that needs to be replaced.
5. Clean the area. Use a damp cloth to clean the area where the new part will be installed. Make sure all dirt and grime is gone.
6. Install the new part. Carefully place the new part in the area, making sure that all the screw holes are lined up properly.
7. Secure the part. Once you are sure the part is in place, screw it in securely using the screws that came with the new part.
8. Test the part. Plug the refrigerator back in and test the part to make sure it is working properly.
9. Enjoy! You have now successfully replaced the Whirlpool WP2208954 Endcap-TRM.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator. This is to ensure your safety and avoid electric shock while working on it.
2. Locate the parts. The Whirlpool WP2208954 Endcap-TRM is located at the back of the refrigerator.
3. Remove the existing part. Carefully remove the part by unscrewing the screws that are attached to it.
4. Inspect for damage. Check for any signs of wear and tear or damage to the part that needs to be replaced.
5. Clean the area. Use a damp cloth to clean the area where the new part will be installed. Make sure all dirt and grime is gone.
6. Install the new part. Carefully place the new part in the area, making sure that all the screw holes are lined up properly.
7. Secure the part. Once you are sure the part is in place, screw it in securely using the screws that came with the new part.
8. Test the part. Plug the refrigerator back in and test the part to make sure it is working properly.
9. Enjoy! You have now successfully replaced the Whirlpool WP2208954 Endcap-TRM.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review