Online Sale!
100% Guaranteed Genuine Parts
W11578839 Whirlpool Roller
Whirlpool W11578839 ROLLER We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Compatible Brands
About this product
Whirlpool W11578839 ROLLER We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The following parts are replaced by this product
- W10248555
Step-by-Step Guide to Replacing the Whirlpool W11578839 ROLLER
1. Shut off the power supply to the dryer. Unplug the dryer or turn off the power at the circuit breaker.
2. Remove the two screws on the top of the dryer panel and lift the panel up.
3. Locate the roller wheel you need to replace. It should be located near the back of the dryer drum.
4. Unplug the power harness from the roller wheel and remove the wheel from the dryer drum.
5. Once the old roller is removed, insert the new roller wheel in the same position as the old one.
6. Plug in the power harness to the new roller wheel.
7. Secure the roller wheel with two screws.
8. Lower the dryer panel and secure the two screws.
9. Restore power to the dryer by plugging in the cord or turning on the power at the circuit breaker.
10. Test the dryer to make sure the roller functions correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off the power supply to the dryer. Unplug the dryer or turn off the power at the circuit breaker.
2. Remove the two screws on the top of the dryer panel and lift the panel up.
3. Locate the roller wheel you need to replace. It should be located near the back of the dryer drum.
4. Unplug the power harness from the roller wheel and remove the wheel from the dryer drum.
5. Once the old roller is removed, insert the new roller wheel in the same position as the old one.
6. Plug in the power harness to the new roller wheel.
7. Secure the roller wheel with two screws.
8. Lower the dryer panel and secure the two screws.
9. Restore power to the dryer by plugging in the cord or turning on the power at the circuit breaker.
10. Test the dryer to make sure the roller functions correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review