Online Sale!
100% Guaranteed Genuine Parts
W10823715 Whirlpool Radiant Surface Element
W10823715 Whirlpool Radiant Surface Element
Weight : 2.589900 lbs
Dimension : 10.310000 x 11.800000 x 2.760000
Compatible Brands
About this product
W10823715 Whirlpool Radiant Surface Element
Weight : 2.589900 lbs
Dimension : 10.310000 x 11.800000 x 2.760000
The following parts are replaced by this product
- 74009743
- WP74009743
No more associated models for this part.
How to Replace the Whirlpool W10823715 ELMNT-SURF
Replacing the Whirlpool W10823715 ELMNT-SURF is a simple DIY project that you can complete with just a few tools. With the help of this guide, you will be able to replace the element in no time. Here’s what you’ll need:
• New Whirlpool W10823715 ELMNT-SURF
• Phillips screwdriver
• Flathead screwdriver
• Needle nose pliers
Steps for Replacing the Whirlpool W10823715 ELMNT-SURF:
1. Unplug the appliance from the power source before beginning the replacement process.
2. Remove the screws securing the back panel of the appliance.
3. Once the panel has been removed, locate the ELMNT-SURF and use the flathead screwdriver to loosen the bracket holding it in place.
4. With the bracket loosened, remove the ELMNT-SURF and discard it. Make sure not to touch any of the electrical parts as they could shock you.
5. Take the new ELMNT-SURF and fit it into the bracket. Use the needle nose pliers to tighten the bracket.
6. Put the back panel back in place and secure it using the screws.
7. Plug the appliance back into the power source and you’re done!
You have successfully replaced the Whirlpool W10823715 ELMNT-SURF and your appliance should now be working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool W10823715 ELMNT-SURF is a simple DIY project that you can complete with just a few tools. With the help of this guide, you will be able to replace the element in no time. Here’s what you’ll need:
• New Whirlpool W10823715 ELMNT-SURF
• Phillips screwdriver
• Flathead screwdriver
• Needle nose pliers
Steps for Replacing the Whirlpool W10823715 ELMNT-SURF:
1. Unplug the appliance from the power source before beginning the replacement process.
2. Remove the screws securing the back panel of the appliance.
3. Once the panel has been removed, locate the ELMNT-SURF and use the flathead screwdriver to loosen the bracket holding it in place.
4. With the bracket loosened, remove the ELMNT-SURF and discard it. Make sure not to touch any of the electrical parts as they could shock you.
5. Take the new ELMNT-SURF and fit it into the bracket. Use the needle nose pliers to tighten the bracket.
6. Put the back panel back in place and secure it using the screws.
7. Plug the appliance back into the power source and you’re done!
You have successfully replaced the Whirlpool W10823715 ELMNT-SURF and your appliance should now be working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review