Online Sale!
100% Guaranteed Genuine Parts
EDR1RXD1 Whirlpool EveryDrop® Filter 1 Refrigerator Water
• This EDR1RXD1 Water Filter (Purple) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water.
• Tested and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42.
• Engineered to provide water that is not only clean but also has a fresh and pure taste.
• Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option.
• Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator.
• Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper.
• For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction.
Weight : 0.000000 lbs
Dimension : 2.000000 x 2.000000 x 7.500000
Compatible Brands
About this product
• This EDR1RXD1 Water Filter (Purple) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water.
• Tested and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42.
• Engineered to provide water that is not only clean but also has a fresh and pure taste.
• Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option.
• Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator.
• Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper.
• For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction.
Weight : 0.000000 lbs
Dimension : 2.000000 x 2.000000 x 7.500000
The following parts are replaced by this product
- W10295370
- W10295370A
- 9930
- W10569758
- W10217316
How to Install Your Refrigerator Water Filter: Step-by-Step Guide
Step 1: Locate the Existing Water Filter
Find the water filter inside your refrigerator—either in the upper right-hand corner or in the base grille, depending on your model.
Step 2: Open the Filter Compartment
Gently lift the filter door to access the current filter.
Step 3: Remove and Discard the Old Filter
Pull the used water filter straight out and dispose of it properly.
Step 4: Prepare the New Water Filter
Unpack your new filter and remove any protective coverings from the O-rings. Ensure the O-rings remain securely in place after the packaging is removed.
Step 5: Install the New Water Filter
Align the filter with the slot so the arrow points upward. Slide it in carefully—do not force it. If it doesn’t insert smoothly, rotate the filter to match the grooves with the notches.
Step 6: Secure the Filter Door
Push the filter door closed until it clicks or snaps into place.
Step 7: Flush and Reset
Run four gallons of water through the dispenser to flush the new filter. Then, reset the filter indicator light on your refrigerator panel.
Step 1: Locate the Existing Water Filter
Find the water filter inside your refrigerator—either in the upper right-hand corner or in the base grille, depending on your model.
Step 2: Open the Filter Compartment
Gently lift the filter door to access the current filter.
Step 3: Remove and Discard the Old Filter
Pull the used water filter straight out and dispose of it properly.
Step 4: Prepare the New Water Filter
Unpack your new filter and remove any protective coverings from the O-rings. Ensure the O-rings remain securely in place after the packaging is removed.
Step 5: Install the New Water Filter
Align the filter with the slot so the arrow points upward. Slide it in carefully—do not force it. If it doesn’t insert smoothly, rotate the filter to match the grooves with the notches.
Step 6: Secure the Filter Door
Push the filter door closed until it clicks or snaps into place.
Step 7: Flush and Reset
Run four gallons of water through the dispenser to flush the new filter. Then, reset the filter indicator light on your refrigerator panel.
Write Your Own Review