804985 Speed Queen Micro-V Drive Belt

How to Replace an 804985 Speed Queen Dryer Micro V Drive Belt

Replacing an 804985 Speed Queen dryer micro V drive belt can extend the life of your dryer and get it back up and running smoothly. Here’s a quick guide on how to do the job yourself in five easy steps.

Tools Needed

You will need the following tools before you begin:

• Phillips screwdriver

• Flathead screwdriver

• Pliers

• Replacement 804985 Speed Queen micro V drive belt

Step 1: Unplug Dryer

Safety first—make sure you unplug the dryer from the wall before you begin.

Step 2: Remove Cabinet

Remove the screws from the front of the cabinet with a Phillips screwdriver, and then pull off the cabinet, taking care not to damage the outside of the dryer while doing so.

Step 3: Remove Idler Arm

The idler arm holds the dryer belt in place, so use a flathead screwdriver to Loosen the two screws that hold the idler arm in place. Once the screws are removed, the idler arm will be free to slide off the dryer.

Step 4: Remove old belt

With the idler arm out of the way, you should be able to pull off the old belt easily.

Step 5: Install new belt

Now, take your new 804985 Speed Queen micro V drive belt and slide the ends into place over the motor pulley and drum. Use pliers to snugly secure the belt.

Once the belt is in place, reattach the idler arm by threading the screws back into place. Finally, slide on the cabinet and replace the screws.

Congratulations! You’ve successfully replaced the 804985 Speed Queen dryer micro V drive belt. Now, you can plug your dryer back in and enjoy it for years to come.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.