803920 Speed Queen Washer Door Lock and Switch Assembly

Step-by-Step DIY Guide to Replacing Speed Queen 803920 ASSY DOOR LATCH/SWITCH

1. Begin by disconnecting the door latch and switch assembly from the door. First, remove the screws that hold the assembly in place.

2. Once all of the screws are removed, carefully lift and pull the assembly out of the door. Set the old assembly aside.

3. Take your new Speed Queen 803920 ASSY DOOR LATCH/SWITCH and, using the screws that you removed, secure the new assembly to the door.

4. Connect the power and data wires to the back of the assembly. Be sure to match the colors of the wires to ensure the proper weatherproof connection.

5.Test the assembly by closing the door. The switch should activate when the door is closed.

6. If it does not, check that all wires are correctly connected, and if there is any damage to the wires, replace them with new ones.

7. When you are sure the replacement is working properly, you have successfully completed the installation of the Speed Queen 803920 ASSY DOOR LATCH/SWITCH!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.