WB2X9154 GE Oven Igniter 8" Leads
General Electric Hotpoint Gas Range Oven Igniter WB2X9154● Round ● 8 in. Leads We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.924200 lbs
Dimension : 11.200000 x 3.700000 x 3.100000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric Hotpoint Gas Range Oven Igniter WB2X9154● Round ● 8 in. Leads We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.924200 lbs
Dimension : 11.200000 x 3.700000 x 3.100000
Write Your Own Review
1. Unplug the oven from the wall or shut off the power at the circuit breaker box.
2. Remove the oven racks and any debris from inside the oven.
3. Locate the existing WB2X9154 GE Oven Ignitor, 8" Leads, and pull the wires out of the back of the oven.
4. Unscrew the ignitor retaining screws and remove the existing ignitor.
5. Insert the new WB2X9154 GE Oven Ignitor, 8" Leads, into the mount and secure it using the same retaining screws.
6. Reinsert the wire terminals into the back of the oven.
7. Plug in the oven or turn the power back on at the circuit breaker box.
8. Test the new ignitor by turning the oven on to ensure it is properly working.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the oven racks and any debris from inside the oven.
3. Locate the existing WB2X9154 GE Oven Ignitor, 8" Leads, and pull the wires out of the back of the oven.
4. Unscrew the ignitor retaining screws and remove the existing ignitor.
5. Insert the new WB2X9154 GE Oven Ignitor, 8" Leads, into the mount and secure it using the same retaining screws.
6. Reinsert the wire terminals into the back of the oven.
7. Plug in the oven or turn the power back on at the circuit breaker box.
8. Test the new ignitor by turning the oven on to ensure it is properly working.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
