Maytag Appliance

IW11368751 HOLDER-CHEESE,We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

This Washer Water-Level Pressure Switch senses and controls the water level in the washer. As the water runs through the hose while the washer tub is filling, it will push air ... against a diaphragm inside the switch. As more water enters the tub, more pressure is applied against the switch. You'll have to remove the control panel of your washer to gain access to this part. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. Remember to unplug the washing machine or shut off the house circuit breaker for the appliance before installing this item. Also be sure to turn off the hot and cold water supplies to your washer. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Water-Level Pressure Switch• Tools Needed: Multi screwdriver Read More Read Less

This Range Lower Bake Element is a replacement part that provides constant heat from the lower oven when cooking. If your oven does not bake properly, check to see if there is ... a burned-out section of the element and replace if needed. The bake element is held into the back of the oven with 2 screws. Make sure, when disconnecting the wires from the old bake element, not to let them fall back into the oven wall. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Lower Bake Element• Tools Needed: Multi screwdriver Read More Read Less

• This EDR2RXD1 Water Filter (Orange) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water. • Tes ...ted and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42. • Engineered to provide water that is not only clean but also has a fresh and pure taste. • Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option. • Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator. • Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper. • For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction. Read More Read Less

This Oven Door Handle creates a sleek, customized look for your appliance. This handle is constructed of shiny black plastic and can be used to replace your oven’s current h ...andle if it is cracked, broken or stained. Installation of this part will require basic hand tools and no disassembly.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Oven Door Handle• Tools Needed: Multi screwdriver Read More Read Less

This Top Load Washer Motor Drive Assembly includes the motor and the motor shield. This 1/2 horsepower drive motor has two shafts - one shaft drives the drain pump, and the ot ...her shaft drives the transmission. The motor causes your washer to spin and agitate properly during the washing cycle. If your washer no longer spins or agitates, the motor may be worn out or damaged and replacing it may alleviate these issues. To access the part, you'll first need to remove the drive belt by tilting the machine back (rest it on something secure or have a friend assist). Remove the drive belt at the bottom of the washer by rotate the transmission pulley counter clockwise and pulling out on the edge of the belt. Then you will disassemble the rest of the washer including the front panel. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Motor Drive Assembly• Tools Needed: Multi screwdriver, putty knife, ratchet with extension and 3/8" socket, pliers Read More Read Less

The SxS Refrigerator Water Filter Housing is a white plastic part that surrounds and protects the appliance’s water filter and connects the water lines to the water filter. ...To access the part, unscrew the water filter counter-clockwise and remove it. Then slide the old cover off. Hook the new cover onto each hinge pin, and then re-install the filter by turning it clockwise. Replacing this part will require basic hand tools, some disassembly of the refrigerator and intermediate repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Filter Housing• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

BOX-BURNER

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.