Online Sale!
100% Guaranteed Genuine Parts
WP67002052 Whirlpool Ice Crusher Blade
WP67002052 Whirlpool Ice Crusher Blade
Weight : 0.359700 lbs
Dimension : 5.000000 x 5.000000 x 1.750000
Compatible Brands
About this product
WP67002052 Whirlpool Ice Crusher Blade
Weight : 0.359700 lbs
Dimension : 5.000000 x 5.000000 x 1.750000
The following parts are replaced by this product
- 10114703
- 67002052
No more associated models for this part.
Step 1: Shut off power to appliance.
Step 2: Open the door to your washing machine and remove the screws holding the agitator in place.
Step 3: Take out agitator and then remove the old Whirlpool WP67002052 WHEEL-CRS from its location.
Step 4: Using a flat head screwdriver, remove the C-clips that are situated around the perimeter of the wheel.
Step 5: Slide the new wheel in place and secure it with the original C-clips.
Step 6: Place the agitator back in its original location, insert the screws and tighten them.
Step 7: Restore power to the washing machine and test the new wheel for proper functioning.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Open the door to your washing machine and remove the screws holding the agitator in place.
Step 3: Take out agitator and then remove the old Whirlpool WP67002052 WHEEL-CRS from its location.
Step 4: Using a flat head screwdriver, remove the C-clips that are situated around the perimeter of the wheel.
Step 5: Slide the new wheel in place and secure it with the original C-clips.
Step 6: Place the agitator back in its original location, insert the screws and tighten them.
Step 7: Restore power to the washing machine and test the new wheel for proper functioning.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review