Online Sale!
100% Guaranteed Genuine Parts
WP34001340 Whirlpool Drain Pump
This Front Load Washer Drain Pump removes waste water from your washer during the drain portion of the wash cycle. If your washer doesn’t drain properly, replacing this part may alleviate the issue. Please note that you must re-use the original mounting bracket from the old pump. Includes pump, grommets, and instructions. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Drain Pump
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Drain Pump
• Tools Needed: Multi screwdriver
Weight : 1.831300 lbs
Dimension : 8.070800 x 6.732200 x 4.685000
Compatible Brands
About this product
This Front Load Washer Drain Pump removes waste water from your washer during the drain portion of the wash cycle. If your washer doesn’t drain properly, replacing this part may alleviate the issue. Please note that you must re-use the original mounting bracket from the old pump. Includes pump, grommets, and instructions. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Drain Pump
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Drain Pump
• Tools Needed: Multi screwdriver
Weight : 1.831300 lbs
Dimension : 8.070800 x 6.732200 x 4.685000
The following parts are replaced by this product
- 34001340
No more associated models for this part.
DIY Guide to Replacing the Whirlpool WP34001340 PUMP-ASM
If you have a Whirlpool WP34001340 PUMP-ASM that needs to be replaced, this DIY guide will help you get the job done right. Follow these steps for a safe and successful pump replacement.
Before You Begin:
1. Make sure to turn off the power to the appliance before beginning any repair.
2. Be sure to unplug the appliance from its electrical outlet.
3. Wear safety goggles to protect your eyes from water, dust, and debris.
4. Use a flathead screwdriver and pliers for this repair.
Step 1: Prepare the Space
1. Remove the screws that are holding the back panel of the appliance in place.
2. Lift the panel off to access the pump and other components.
Step 2: Disconnect the Pump
1. Locate the pump assembly and disconnect the two hoses connected to it.
2. Use a pair of pliers to loosen and remove the clamps that are securing the hoses to the pump.
Step 3: Remove the Pump Assembly
1. Unscrew the screws that are holding the pump assembly in place.
2. Use a flathead screwdriver to carefully pry it off the base.
Step 4: Install the New Pump Assembly
1. Carefully slide the new pump assembly into the base.
2. Screw it in place using the screws you removed in Step 3.
Step 5: Reattach the Hoses
1. Place the two hoses back onto the pump assembly, making sure they are securely connected.
2. Use a pair of pliers to tighten the hose clamps and secure them in place.
Step 6: Finish Up
1. Put the back panel back in place and secure it with the screws.
2. Double check all connections and make sure everything is properly secured.
3. Plug the appliance back into its electrical outlet and turn the power on.
Congratulations! You have successfully replaced the Whirlpool WP34001340 PUMP-ASM.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you have a Whirlpool WP34001340 PUMP-ASM that needs to be replaced, this DIY guide will help you get the job done right. Follow these steps for a safe and successful pump replacement.
Before You Begin:
1. Make sure to turn off the power to the appliance before beginning any repair.
2. Be sure to unplug the appliance from its electrical outlet.
3. Wear safety goggles to protect your eyes from water, dust, and debris.
4. Use a flathead screwdriver and pliers for this repair.
Step 1: Prepare the Space
1. Remove the screws that are holding the back panel of the appliance in place.
2. Lift the panel off to access the pump and other components.
Step 2: Disconnect the Pump
1. Locate the pump assembly and disconnect the two hoses connected to it.
2. Use a pair of pliers to loosen and remove the clamps that are securing the hoses to the pump.
Step 3: Remove the Pump Assembly
1. Unscrew the screws that are holding the pump assembly in place.
2. Use a flathead screwdriver to carefully pry it off the base.
Step 4: Install the New Pump Assembly
1. Carefully slide the new pump assembly into the base.
2. Screw it in place using the screws you removed in Step 3.
Step 5: Reattach the Hoses
1. Place the two hoses back onto the pump assembly, making sure they are securely connected.
2. Use a pair of pliers to tighten the hose clamps and secure them in place.
Step 6: Finish Up
1. Put the back panel back in place and secure it with the screws.
2. Double check all connections and make sure everything is properly secured.
3. Plug the appliance back into its electrical outlet and turn the power on.
Congratulations! You have successfully replaced the Whirlpool WP34001340 PUMP-ASM.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review