Online Sale!
100% Guaranteed Genuine Parts
W11346197 Whirlpool Magnetron
Maytag Samsung Admiral Amana Whirlpool KitchenAid Jenn-Air Sears Kenmore Roper Microwave Oven MAGNETRON W10120113
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Weight : 0.007200 lbs
Dimension : 0.111000 x 0.111000 x 0.111000
Compatible Brands
About this product
Maytag Samsung Admiral Amana Whirlpool KitchenAid Jenn-Air Sears Kenmore Roper Microwave Oven MAGNETRON W10120113
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Weight : 0.007200 lbs
Dimension : 0.111000 x 0.111000 x 0.111000
The following parts are replaced by this product
- W10120113
- 461967847321
- W11098747
No more associated models for this part.
1. Gather the necessary tools for the job. You will need a Phillips screwdriver, a pair of needle nose pliers, and a volt ohm meter.
2. Unplug the appliance and shut off the power to the circuit breaker to ensure that you do not get shocked while performing maintenance.
3. Remove the screws on the back panel using your screwdriver and carefully remove the panel.
4. Locate the old magnetron and use your needle nose pliers to gently tug it out of its bracket.
5. Place the new magnetron in its place and secure it with the screws.
6. Replace the back panel, plug the appliance back in and turn on the power to the circuit breaker.
7. Check the wattage of the magnetron with your volt ohm meter to make sure it is working correctly.
8. Turn on the appliance and check to make sure it is heating as normal.
9. If it does not heat, then you may need to call a professional to help you diagnose the issue.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Unplug the appliance and shut off the power to the circuit breaker to ensure that you do not get shocked while performing maintenance.
3. Remove the screws on the back panel using your screwdriver and carefully remove the panel.
4. Locate the old magnetron and use your needle nose pliers to gently tug it out of its bracket.
5. Place the new magnetron in its place and secure it with the screws.
6. Replace the back panel, plug the appliance back in and turn on the power to the circuit breaker.
7. Check the wattage of the magnetron with your volt ohm meter to make sure it is working correctly.
8. Turn on the appliance and check to make sure it is heating as normal.
9. If it does not heat, then you may need to call a professional to help you diagnose the issue.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review