W10873791 Whirlpool Refrigerator Ice Maker Assembly
The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This 10-cube replacement ice maker includes the housing and complete assembly, and is compatible with several refrigerator models with in-door ice and water dispensers. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Note that this assembly does not include a bail arm; remove the bail arm from the existing ice maker to reuse with the new part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This 10-cube replacement ice maker includes the housing and complete assembly, and is compatible with several refrigerator models with in-door ice and water dispensers. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Note that this assembly does not include a bail arm; remove the bail arm from the existing ice maker to reuse with the new part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- W10760070
- W10847507
Replacing the Whirlpool Refrigerator Ice Maker Assembly (W10873791)
This DIY guide will explain how to safely and effectively replace the Whirlpool Refrigerator Ice Maker Assembly.
Tools & Equipment:
-Phillips-head screwdriver
-Long flat-head screwdriver
-Small container for the parts
-Replacement W10873791 Ice Maker Assembly
Step 1: Before you start, unplug the refrigerator from the wall outlet and shut off the water supply.
Step 2: Remove the ice bin from the inside of the refrigerator and empty out any ice that may remain in it.
Step 3: Locate the two screws on the side of the ice maker assembly and use the Phillips-head screwdriver to unscrew them.
Step 4: Once the screws have been removed, use the flat-head screwdriver to gently pry the assembly away from the wall of the refrigerator.
Step 5: Carefully disconnect the wiring harness from the back of the assembly and remove it from the refrigerator.
Step 6: Place all of the parts from the old assembly in the small container so they can be properly disposed of, or saved if desired.
Step 7: Unpack the replacement W10873791 Ice Maker Assembly and connect the wiring harness to the back of the assembly.
Step 8: Slide the new assembly into place and secure it with the two screws.
Step 9: Reconnect the refrigerator to the wall outlet and turn on the water supply.
Step 10: Place the ice bin back in the freezer and wait a few hours for ice to be made.
Once complete, you should now have a fully functional W10873791 Whirlpool Refrigerator Ice Maker Assembly. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This DIY guide will explain how to safely and effectively replace the Whirlpool Refrigerator Ice Maker Assembly.
Tools & Equipment:
-Phillips-head screwdriver
-Long flat-head screwdriver
-Small container for the parts
-Replacement W10873791 Ice Maker Assembly
Step 1: Before you start, unplug the refrigerator from the wall outlet and shut off the water supply.
Step 2: Remove the ice bin from the inside of the refrigerator and empty out any ice that may remain in it.
Step 3: Locate the two screws on the side of the ice maker assembly and use the Phillips-head screwdriver to unscrew them.
Step 4: Once the screws have been removed, use the flat-head screwdriver to gently pry the assembly away from the wall of the refrigerator.
Step 5: Carefully disconnect the wiring harness from the back of the assembly and remove it from the refrigerator.
Step 6: Place all of the parts from the old assembly in the small container so they can be properly disposed of, or saved if desired.
Step 7: Unpack the replacement W10873791 Ice Maker Assembly and connect the wiring harness to the back of the assembly.
Step 8: Slide the new assembly into place and secure it with the two screws.
Step 9: Reconnect the refrigerator to the wall outlet and turn on the water supply.
Step 10: Place the ice bin back in the freezer and wait a few hours for ice to be made.
Once complete, you should now have a fully functional W10873791 Whirlpool Refrigerator Ice Maker Assembly. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
