W10135004 Whirlpool Spring
The Washer Suspension Spring Set, 2-pack supports the outer tub and keeps the tub stable during unbalanced loads. The set includes all of the suspension springs used on the washer. These springs can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this accessory.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Suspension Spring Set, 2-pack
• Tools Needed: Standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Suspension Spring Set, 2-pack
• Tools Needed: Standard pliers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Washer Suspension Spring Set, 2-pack supports the outer tub and keeps the tub stable during unbalanced loads. The set includes all of the suspension springs used on the washer. These springs can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this accessory.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Suspension Spring Set, 2-pack
• Tools Needed: Standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Washer Suspension Spring Set, 2-pack
• Tools Needed: Standard pliers
Write Your Own Review
The following parts are replaced by this product
- 8181762
- 8182814
Replacing the Whirlpool W10135004 Spring
If you need to replace the Whirlpool W10135004 spring, you can do it yourself in just a few simple steps. Follow these instructions to get your appliance working again.
Tools and Materials You'll Need:
- Phillips screwdriver
- Pliers
- Whirlpool W10135004 spring
Step 1: Unplug the Appliance.
Before you begin any repair or maintenance, make sure that you unplug the appliance from its power source.
Step 2: Remove the Top Cover.
Using your Phillips screwdriver, remove the screws located on the top cover of the appliance. Once the cover is removed, locate the faulty spring.
Step 3: Locate and Remove the Spring.
Using your pliers, carefully remove the old spring. Make sure that you keep the spring in one piece and recycle it properly.
Step 4: Replace the Spring.
Take the new Whirlpool W10135004 spring and place it into the spot where the old spring was. Make sure that it fits snugly and securely.
Step 5: Reattach the Cover.
Once the spring has been replaced, reattach the top cover and secure it with the Phillips screws.
Step 6: Plug the Appliance Back In.
Plug the appliance back in and test the new spring. If everything works properly, then you have successfully replaced the Whirlpool W10135004 spring.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you need to replace the Whirlpool W10135004 spring, you can do it yourself in just a few simple steps. Follow these instructions to get your appliance working again.
Tools and Materials You'll Need:
- Phillips screwdriver
- Pliers
- Whirlpool W10135004 spring
Step 1: Unplug the Appliance.
Before you begin any repair or maintenance, make sure that you unplug the appliance from its power source.
Step 2: Remove the Top Cover.
Using your Phillips screwdriver, remove the screws located on the top cover of the appliance. Once the cover is removed, locate the faulty spring.
Step 3: Locate and Remove the Spring.
Using your pliers, carefully remove the old spring. Make sure that you keep the spring in one piece and recycle it properly.
Step 4: Replace the Spring.
Take the new Whirlpool W10135004 spring and place it into the spot where the old spring was. Make sure that it fits snugly and securely.
Step 5: Reattach the Cover.
Once the spring has been replaced, reattach the top cover and secure it with the Phillips screws.
Step 6: Plug the Appliance Back In.
Plug the appliance back in and test the new spring. If everything works properly, then you have successfully replaced the Whirlpool W10135004 spring.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
