Online Sale!
100% Guaranteed Genuine Parts
74007736 Whirlpool Gas Range Cooktop Burner Assembly (15K)
This Gas Range Surface Burner Head with spark electrode is a replacement part that directs the gas to the burner of your range, distributing gas through holes or slots to create an even flame across the cooking area. If your burner no longer ignites, you may alleviate this issue by replacing this part. Installing this item will require basic hand tools, some disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item. Also make sure to turn off the gas valve before the repair. Caution: the wires must be handled with care; ensure that they don't fall down inside the appliance after you remove the old burner head.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Surface Burner Head
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Surface Burner Head
• Tools Needed: Multi screwdriver
Weight : 0.440200 lbs
Dimension : 4.330700 x 4.173200 x 3.385800
Compatible Brands
About this product
This Gas Range Surface Burner Head with spark electrode is a replacement part that directs the gas to the burner of your range, distributing gas through holes or slots to create an even flame across the cooking area. If your burner no longer ignites, you may alleviate this issue by replacing this part. Installing this item will require basic hand tools, some disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item. Also make sure to turn off the gas valve before the repair. Caution: the wires must be handled with care; ensure that they don't fall down inside the appliance after you remove the old burner head.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Surface Burner Head
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Range Surface Burner Head
• Tools Needed: Multi screwdriver
Weight : 0.440200 lbs
Dimension : 4.330700 x 4.173200 x 3.385800
The following parts are replaced by this product
- 74007736
Replacing the 74007736 Whirlpool Gas Range Stove Cooktop BURNER ASSEMBLY (15K)
Instructions:
1. Turn off the gas supply by using the shut off valve or control knob.
2. Remove the grates and burner caps and set them aside in a safe place.
3. Unscrew the mounting screws for the burner with a Phillips head screwdriver and remove the old BURNER ASSEMBLY.
4. Take the new BURNER ASSEMBLY and align it to the holes in the cooktop and secure it with the mounting screws.
5. Reconnect the gas line from the shut off valve or control knob.
6. Test the connection and make sure there is no leak.
7. Replace the grates and burner caps and turn on the gas supply.
8. Test the new BURNER ASSEMBLY to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions:
1. Turn off the gas supply by using the shut off valve or control knob.
2. Remove the grates and burner caps and set them aside in a safe place.
3. Unscrew the mounting screws for the burner with a Phillips head screwdriver and remove the old BURNER ASSEMBLY.
4. Take the new BURNER ASSEMBLY and align it to the holes in the cooktop and secure it with the mounting screws.
5. Reconnect the gas line from the shut off valve or control knob.
6. Test the connection and make sure there is no leak.
7. Replace the grates and burner caps and turn on the gas supply.
8. Test the new BURNER ASSEMBLY to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review