5303935271 Frigidaire Oven Terminal Block
The Frigidaire 5303935271 Terminal Block Kit is the perfect addition to your wall oven or range. Featuring several copper copper-plated terminal blocks, this kit is designed to withstand high temperatures and high levels of current. With its durable construction, it ensures long-lasting use. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The Frigidaire 5303935271 Terminal Block Kit is the perfect addition to your wall oven or range. Featuring several copper copper-plated terminal blocks, this kit is designed to withstand high temperatures and high levels of current. With its durable construction, it ensures long-lasting use. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Replacing your Frigidaire 5303935271 TERMINAL BLOCK KIT
1. Begin by turning off the power to the appliance. Unplug the appliance from the wall socket or switch off the circuit breaker.
2. Open up the access panel on the back of the appliance and locate the terminal block. Depending on the model, the terminal block may be held in place with screws or plastic clips.
3. Disconnect each wire from the old terminal block. For safety's sake, label the wires so that you'll remember where each one goes when you attach the new block.
4. Carefully remove the old terminal block and set it aside.
5. Take the Frigidaire 5303935271 TERMINAL BLOCK KIT out of its packaging. Check to make sure all pieces are included and in good condition before installation.
6. Install the new terminal block in the same manner as the old one. Make sure all connections are tight.
7. Reconnect each wire to the new terminal block and double-check that each connection is properly made.
8. Once all connections are secure, close the access panel and turn the power back on. Test your appliance to make sure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Begin by turning off the power to the appliance. Unplug the appliance from the wall socket or switch off the circuit breaker.
2. Open up the access panel on the back of the appliance and locate the terminal block. Depending on the model, the terminal block may be held in place with screws or plastic clips.
3. Disconnect each wire from the old terminal block. For safety's sake, label the wires so that you'll remember where each one goes when you attach the new block.
4. Carefully remove the old terminal block and set it aside.
5. Take the Frigidaire 5303935271 TERMINAL BLOCK KIT out of its packaging. Check to make sure all pieces are included and in good condition before installation.
6. Install the new terminal block in the same manner as the old one. Make sure all connections are tight.
7. Reconnect each wire to the new terminal block and double-check that each connection is properly made.
8. Once all connections are secure, close the access panel and turn the power back on. Test your appliance to make sure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
