100% Guaranteed Genuine Parts
766P3A Speed Queen Hub and Seal Kit
766P3A Speed Queen Hub and Seal Kit
Weight : 2.222500 lbs
Dimension : 7.047200 x 7.047200 x 6.220400
About this product
766P3A Speed Queen Hub and Seal Kit
Weight : 2.222500 lbs
Dimension : 7.047200 x 7.047200 x 6.220400
The following parts are replaced by this product
- 766P3
- 200512
DIY Speed Queen Hub and Seal Kit Replacement
Replacing the 766P3A Speed Queen Hub and Seal Kit is a simple, DIY project that requires minimal tools and effort. This guide will walk you through the steps of replacing the kit with ease and efficiency.
Tools Needed:
- Flathead screwdriver
- Socket Wrench and Socket Set
- Vice Grips (optional)
- White Lithium Grease (optional)
Instructions:
1. Disconnect power to the washer. Unplug the power cord from the wall outlet.
2. Remove the top panel by unscrewing the screws located on the back of the washer.
3. Locate the hub and seal between the drive shaft and the inner basket.
4. Use the flathead screwdriver to disconnect the electric wires connected to the motor.
5. Using the socket wrench and socket set, carefully unscrew the hub and seal from the washer.
6. If the hub and seal are stuck, use the vice grips to help loosen them.
7. Once the hub and seal are removed, use the white lithium grease to lubricate the new hub and seal before installing it.
8. Replace the hub and seal by unscrewing the bolts and screws and attaching them securely.
9. Reconnect the wires to the motor.
10. Reattach the top panel, and plug the power cord back into the wall outlet.
Your Speed Queen Hub and Seal Kit replacement is complete! With these easy-to-follow DIY instructions, you can replace the 766P3A Speed Queen Hub and Seal Kit in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the 766P3A Speed Queen Hub and Seal Kit is a simple, DIY project that requires minimal tools and effort. This guide will walk you through the steps of replacing the kit with ease and efficiency.
Tools Needed:
- Flathead screwdriver
- Socket Wrench and Socket Set
- Vice Grips (optional)
- White Lithium Grease (optional)
Instructions:
1. Disconnect power to the washer. Unplug the power cord from the wall outlet.
2. Remove the top panel by unscrewing the screws located on the back of the washer.
3. Locate the hub and seal between the drive shaft and the inner basket.
4. Use the flathead screwdriver to disconnect the electric wires connected to the motor.
5. Using the socket wrench and socket set, carefully unscrew the hub and seal from the washer.
6. If the hub and seal are stuck, use the vice grips to help loosen them.
7. Once the hub and seal are removed, use the white lithium grease to lubricate the new hub and seal before installing it.
8. Replace the hub and seal by unscrewing the bolts and screws and attaching them securely.
9. Reconnect the wires to the motor.
10. Reattach the top panel, and plug the power cord back into the wall outlet.
Your Speed Queen Hub and Seal Kit replacement is complete! With these easy-to-follow DIY instructions, you can replace the 766P3A Speed Queen Hub and Seal Kit in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review