DA81-06007A Samsung Refrigerator Filter Dryer

1. Unplug the Samsung dryer from the wall outlet and turn off the gas supply (if applicable).

2. Remove the back panel of the machine by twisting it counter-clockwise, then lifting it up and off the machine.

3. Locate the thermal fuse DA81-06007A on the internal body of the dryer. It will be a small, white box with two wires attached to it.

4. Disconnect the wires attached to the fuse. Take a note of their color and orientation before detaching them so that you can easily reattach them to the new fuse.

5. Unscrew the mounting screws to remove the old thermal fuse and replace it with the new one.

6. Reattach the wires to the new fuse. Make sure the connection is tight and secure.

7. Put the back panel back in place, screwing it back in clockwise to secure it.

8. Plug your dryer back into the wall outlet and turn on the gas supply (if applicable).

9. Test the dryer and make sure everything is working as expected.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.