4713-001165 Samsung Halogen Light Bulb 20W 120V 2 Pin G8 8mm Base

Replacing a Samsung Halogen Light Bulb 4713-001165 - Step-By-Step DIY Instructions

1. Before replacing the Samsung Halogen light bulb, be sure to turn off the power at the circuit breaker panel, or unscrew the light bulb from the socket.

2. Gently unscrew the light bulb from the socket. Depending on the type of socket you have, you may need a screwdriver or other tool to loosen the bulb before it can be removed.

3. Once the old bulb has been removed, inspect the base and make sure that it has not been damaged in any way. If it is damaged, replace it before proceeding.

4. Grab your new Samsung Halogen Light Bulb 4713-001165, which should be a 20W, 120V 2 Pin G8 8mm Base.

5. Insert the new bulb into the socket, making sure the pins match up with the holder. If the pins do not line up, remove the bulb and check for proper alignment. If the pins still won't line up, you may have the wrong type of bulb.

6. Tighten the new bulb securely into the socket.

7. Turn the power back on, or replace the light switch. Check to make sure the new bulb is working properly.

DIY instructions on replacing the 4713-001165 Samsung Halogen Light Bulb 20W 120V 2 Pin G8 8mm Base is now complete!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.