WB62K10003 GE Oven Cooktop (White)
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Write Your Own Review
Replacing the Whirlpool W10401225 GLASS-DOOR
If you need to replace the Whirlpool W10401225 GLASS-DOOR, this DIY guide can help you do it yourself. To complete the job, you will need a few tools. These include a regular Phillips screwdriver, a Phillips head security screwdriver, a putty knife, and a 1/4-inch nut driver.
Step 1: Start by turning off the power to the refrigerator. Then unplug the unit from the power outlet.
Step 2: Remove the ice bin and any other components inside the unit.
Step 3: Using a Phillips head screwdriver, unscrew the screws that hold the trim in place on the door frame.
Step 4: With a putty knife, pry the trim away from the door frame.
Step 5: Locate the four screws that secure the existing glass door to the hinges on the frame.
Step 6: With a 1/4-inch nut driver, remove the screws.
Step 7: Carefully remove the glass door from the frame and set it aside.
Step 8: Place the new Whirlpool W10401225 GLASS-DOOR into the frame. Make sure it is properly centered.
Step 9: Secure the new glass door to the frame using the 1/4-inch nut driver.
Step 10: Replace the trim pieces around the door frame. Secure them with the screws that were removed in step 3.
Step 11: Reinstall all of the components from the interior of the refrigerator.
Step 12: Plug the refrigerator back in, and turn the power back on.
You have now successfully replaced the Whirlpool W10401225 GLASS-DOOR.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you need to replace the Whirlpool W10401225 GLASS-DOOR, this DIY guide can help you do it yourself. To complete the job, you will need a few tools. These include a regular Phillips screwdriver, a Phillips head security screwdriver, a putty knife, and a 1/4-inch nut driver.
Step 1: Start by turning off the power to the refrigerator. Then unplug the unit from the power outlet.
Step 2: Remove the ice bin and any other components inside the unit.
Step 3: Using a Phillips head screwdriver, unscrew the screws that hold the trim in place on the door frame.
Step 4: With a putty knife, pry the trim away from the door frame.
Step 5: Locate the four screws that secure the existing glass door to the hinges on the frame.
Step 6: With a 1/4-inch nut driver, remove the screws.
Step 7: Carefully remove the glass door from the frame and set it aside.
Step 8: Place the new Whirlpool W10401225 GLASS-DOOR into the frame. Make sure it is properly centered.
Step 9: Secure the new glass door to the frame using the 1/4-inch nut driver.
Step 10: Replace the trim pieces around the door frame. Secure them with the screws that were removed in step 3.
Step 11: Reinstall all of the components from the interior of the refrigerator.
Step 12: Plug the refrigerator back in, and turn the power back on.
You have now successfully replaced the Whirlpool W10401225 GLASS-DOOR.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
