Whirlpool Appliance

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Drive Belt wraps around the motor and pulley. If your dryer's drum isn't tumbling as expected, replacing this part may alleviate the issue. To access the part, open ...the dryer door and take a putty knife around the edge of the top of your dryer and find the release clips on each side – press these in to release the top of the dryer so you can swing it open. You'll need to remove the dryer drum from the dryer cabinet to install this part. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drive Belt• Tools Needed: Flat-blade screwdriver, putty knife, 5/16" nut driver Read More Read Less

The Dryer Thermal Fuse shuts off the motor in an electric dryer when the appliance overheats. If your dryer won't start or will run but no longer heat, replacing this part may ... alleviate the issue. Note that the thermal fuse cannot be reset. Fuses may blow due to a clogged dryer vent, so make sure you clean out this vent when installing the new part. The fuse is located behind the lower front access panel of the dryer. For easier access, you may want to remove the dryer drum behind the entire front panel. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Thermal Fuse• Tools Needed: Multi screwdriver, 1/4" nut driver Read More Read Less

WP3391912 is an original equipment manufactured (OEM) part. Ensure the optimal performance and safety of your dryer with this reliable high limit thermostat. Designed specific ...ally for Whirlpool appliances, this component plays a crucial role in regulating temperature to prevent overheating. Compatible across a wide range of brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, this part is ideal for various dryer models. With its durable construction, this thermostat not only enhances your appliance's efficiency but also extends its lifespan. Whether you’re in need of a replacement or an upgrade, this high limit thermostat provides peace of mind and dependable operation. Trust in a part that upholds Whirlpool's reputation for quality and performance. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Maintain your dryer’s performance with this high-quality motor pulley, designed specifically for various Whirlpool appliances and compatible brands including Admiral, Amana, ... Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. Crafted to ensure precise fit and functionality, this part is ideal for maintaining optimal dryer operation, preventing potential breakdowns, and enhancing the lifespan of your appliance. Made from durable materials, this motor pulley guarantees reliability under intense wear and tear. Whether you're repairing or replacing an old part, this component is essential for achieving efficient drying results. Easy to install, it can save you time and costly service calls. Ensure your laundry days run smoothly with this dependable motor pulley, perfect for those who value performance and quality. Read More Read Less

This Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting wh ...en replacing a blown thermal fuse. The thermal cut off is located on top of the burner funnel under the dryer drum, so you'll need to remove the drum from the dryer cabinet to access the old part and replace it. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Thermal Cut Off Fuse• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Idler Pulley sits between the motor and the drum of the dryer, putting tension on the drive belt. If your iddler wheen no longer rotates the drum freely or makes a s ...queeking sound, replacing this part may alleviate the issue. Note that you'll need to reuse the spring from the existing pulley on the new part. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Recommended Items: Also consider replacing the Drive Belt (item WP8547168) when the dryer is disassembled to complete this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Idler Pulley• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This Top Load Washer Leveling Leg is a white plastic part that allows your appliance to sit perfectly flat. Install the new leveling leg and test to see if you have it adjuste ...d properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Transfer the locking nut from the current leveling leg onto the new item before installation. Replacing this part will not require any tools, disassembly or repair experience. Recommended Accessory: You may need a new locking nut (item WP3359452) to complete this repair if the one on the appliance’s current leveling leg is rusted to the part and cannot to be removed. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Leveling Leg• No tools required for installation Read More Read Less