Roper Appliance Parts Washer Parts

This Top Load Washer Start Capacitor briefly increases the voltage to the motor to help the motor start. If your washer motor won't start or hums, replacing this part may alle ...viate the issue. Remove the washer console and then the spring clips that hold the body to the frame of the washer. Transfer the old foam shield holding the old capacitor to the new part before installing. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Start Capacitor• Tools Needed: Multi screwdriver or putty knife depending on washer model Read More Read Less

The Front Load Dryer Tumbler Bearing Kit is in the front of the dryer and the dryer drum rides along it. The Bearing Kit helps the drum rotate smoothly and quietly. If your dr ...um is making uncommon noise during operation, replacing this part may alleviate the issue. This kit includes the bearing, a cork pad, glide, and two rivets. Note that dryers use two of these bearings in the front and both should be replaced at the same time. You'll remove the door and the front panel of your dryer to install this part. Installation of this part requires the use of a rivet gun. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Tumbler Bearing Kit• Tools Needed: Multi screwdriver, 5/16" nut driver, rivet gun Read More Read Less

W10411000 is an original equipment manufactured (OEM) part. Ensure your laundry appliances run smoothly with this high-quality drive motor, designed specifically for a range o ...f washer brands. Manufactured by Whirlpool, this reliable component is crucial for efficient washing performance, making it an essential part of your appliance maintenance. This motor is compatible with various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool. Whether you're tackling tough stains or managing everyday laundry, this drive motor delivers consistent results to keep your washer in top condition. Invest in this durable and dependable part to restore performance and prolong the life of your washing machine. Perfect for DIY repairs or professional appliance services, it ensures your laundry routine is always efficient and hassle-free. Read More Read Less

Discover the essential W11126319 Coin Chute designed specifically for Whirlpool appliances. This high-quality deflector and chute replacement ensures optimal functionality for ... your washer dryer system, enhancing your laundry experience. Compatible with a wide range of renowned brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, this part offers versatility for various models. Crafted with durability in mind, it helps to prevent jams and ensures smooth operation, making it a reliable addition to your household. Maintain your washer parts effortlessly and enjoy enhanced performance. Perfect for both DIY enthusiasts and professional repair technicians, this component supports efficient laundry processes. Invest in quality and longevity with this dependable chute replacement. Read More Read Less

This Top Load Washer Water Inlet Valve opens to allow water to enter the washing machine. The attaching solenoids on the valve open and close according to the desired temperat ...ure, or amount of water needed. If your washer won't stop filling with water, won't produce cold or hot water, won't fill at all, or is leaking, replacing the inlet valve may alleviate these issues.This inlet valve has 4 terminals and is located at the back of the machine. To access the part, you'll need to separate the washer cabinet from the washer and disconnect the red and white wiring connectors from the old part. Recommended Item: Washer Fill Hose (item 8212487RP). Package of two 5' industrial braid hoses with pre-installed washers and straight ends. We recommend replacing washing machine inlet hoses after 5 years of use to reduce the risk of hose failure. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Inlet Valve Assembly• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This Combination Washer Water Inlet Valve allows cold water to fill in the washer during the cleaning cycle. This part has a standard hose fitting inlet with (1) water outlet. ... If your washer isn’t getting any cold water, is filling slowly, not filling at all or leaking cold water onto the floor, replacing the valve may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Combination Washer Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dryer Lint Filter is a screen that provides proper air flow and operation of your dryer. The filter should be cleaned before every load of laundry and replaced immediatel ...y if damaged. Replacing your dryer’s lint filter is a quick and essential way to keep your appliance operating at optimal levels.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Lint Filter• No tools required for installation Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.