Roper Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Electric Range Coil Surface Element is a 6" D, 4-turn delta base heating element with looped terminal ends. This element features easy-to-install “plug in” style termi ...nals and is compatible with many electric oven makes and models. If your stove's burner no longer heats up, replacing this part may alleviate the issue. Installing this part will require no tools, disassembly or repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Items: If the range's terminals are corroded, you can replace them with the Element Receptacle and Wire Kit (item 12001676). Stainless-steel Burner Drip Bowls (item 715877) are available if the ones on your range need to be replaced.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Coil Surface Element• No tools required for installation Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

CNTRL-ELEC

CNTRL-ELEC+CORE

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

CNTRL-ELEC

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Top Load Washer Spanner Nut tightens down the drive block to hold the inner tub of your washer in place. If the nut is damaged from corrosion, it may need to be replaced. ... The spanner nut sits on top of the agitator. In order to access the part, you'll have to remove the fabric softener dispenser or cap first. You'll then remove the agitator from the washer by holding a fin and removing the bolt. If you have trouble removing the nut, letting it rest in penetrating oil may help. Use a rubber hammer to pound the nut off if necessary. It may help to have someone hold the tub at the same time. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Spanner Nut• Tools Needed: Multi screwdriver, spanner wrench, rubber hammer Read More Read Less

The Top Load Washing Machine Balance Spring Kit, Set of 3 keeps the weight of the wash tub balanced. If the end of the spring rusts and your tub sits off balance, this part ma ...y need to be replaced. To access this part, you'll first need to remove the control panel of the washer. Usually held in place by two screws, some washer models have trim covers that need to be removed before gaining access to the screws. You'll only use one spring from this kit of three depending on the color label on your motor. Replacing this part will require basic hand tools, some disassembly of the combination washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washing Machine Balance Spring Kit, Set of 3• Tools Needed: Multi screwdriver Read More Read Less

The Top Freezer Refrigerator Start Device Relay and Overload is mounted to the side of the compressor on the back of the refrigerator and causes the compressor to start when r ...efrigeration is needed. If your refrigerator is not cold, or you hear humming or clicking noises coming from the back of the appliance, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Freezer Refrigerator Start Device Relay and Overload• Tools Needed: 1/4" nut driver and flat blade screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Timer controls the appliance’s wash cycle operations, including filling, soaking, washing, spinning and rinsing. If your dryer is no longer progressing properly th ...rough each cycle, you may need to replace the assembly with this item. Remove the timer knob and then the rear access panel behind the machine to access the part. Installing the timer will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Timer• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Maintain the functionality of your refrigerator with this durable shelf support designed for optimal performance. Crafted by a reputable brand, it is compatible with a wide ra ...nge of refrigerator models, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool. This replacement part ensures your shelves remain stable and secure, allowing for effective storage of your food items. Constructed for longevity and ease of installation, this shelf support will restore your refrigerator’s organization and efficiency. Whether you’re replacing a worn part or upgrading your appliance, this high-quality component will meet your needs and exceed your expectations. Keep your kitchen running smoothly with this essential refrigerator accessory. Read More Read Less

This Dryer Lint Screen Foam Seal forms a seal to prevent air from escaping the rear of the dryer drum and the lint duct. This model comes with adhesive backing and is located ...in between the lint chute and the bulkhead of your appliance. You may need to replace this part if your clothing is taking too long to dry, or if your dryer is not generating enough heat or no heat at all. Measures approximately 28" L x 1" W. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Lint Screen Foam Seal• Tools Needed: Multi screwdriver Read More Read Less

This Microwave Vent Grill, Black, is a replacement piece for your over-the-range microwave that covers components inside the microwave while allowing airflow through the slats .... This accessory can be used with many different brands and models; check your model number to confirm compatibility. Installing this vent grill may require basic hand tools and novice repair experience. Be sure to unplug the microwave or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Microwave Vent Grille, Black• Tools Needed: Multi screwdriver Read More Read Less

Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Caloric Gaffers and Sattler Magic Chef Norge Sears Kenmore Admiral Almond appliance touch-up acrylic paint. 18ml (0.6oz) bottl ...e with a fine tip applicator inside cap.We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

WPW10185971 is an original equipment manufactured (OEM) part. Ensure your dryer operates at peak efficiency with this essential timer, designed for seamless compatibility with ... various brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool. Crafted by Whirlpool, this circuit board and timer combination represents reliable performance and durability, vital for effective clothes drying. Its precise overlay ensures straightforward operation, minimizing the chances of appliance malfunction. Whether you're replacing a worn-out part or performing maintenance, this timer simplifies the process and enhances your appliance's functionality. Maintain your dryer with this premium component and enjoy consistent drying cycles and reduced energy consumption. Trust in Whirlpool’s reputation for quality and make the smart choice for your home. Read More Read Less

CNTRL-ELEC+CORE

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.