Estate

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Lint Screen is a white screen that provides proper air flow and operation of your dryer by trapping lint and debris from the exhaust air flowing from the dryer. Afte ...r pulling the old filter out, be sure to clean the channels of the lint housing before inserting the new lint screen. The filter should be cleaned before every load of laundry and replaced immediately if damaged. Replacing your dryer’s lint filter is a quick and essential way to keep your appliance operating at optimal levels. Installing this part requires no tools, disassembly or repair experience. Recommended Tool: The Cleaning Brush (item 4210463RW) is useful to remove lint and other debris from the dryer’s venting.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Lint Screen• No tools required for installation Read More Read Less

The Refrigerator Door Shelf Bar is a white metal shelf that attaches to the inner door of the appliance and is typically used to hold jars and bottles that would take up space ... in the main section of the refrigerator. To install, you must snap the shelf into brackets at both ends to secure it to the refrigerator’s door. You'll remove the end caps from the old bar to use them with the new bar. Replacing this part will require basic hand tools or repair experience. Remember to unplug the appliance or shut off the house circuit breaker for the appliance before installing. Helpful Tip: This design of this item may differ slightly from the original part. Sometimes the new bar is longer than the old and needs to be shortened.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Door Shelf Bar• Tools Needed: Multi screwdriver, needle nose pliers, sheet metal cutters, marker, ruler (if new bar needs to be shortened) Read More Read Less

The 60Hz Dryer Timer controls the electrical components of the appliance and duration of its drying cycles. If any of the contacts in your appliance’s timer have burned out, ... or if the motor inside the unit shorted out and the timer is no longer functioning, you can easily replace the assembly with this part. Installing the timer will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) 60Hz Dryer Timer• Tools Needed: Multi screwdriver Read More Read Less

The SxS Refrigerator Door Shelf Bar is a white plastic shelf that attaches to the inner door of the appliance and is typically used to hold jars and bottles that would take up ... space in the main section of the refrigerator. Constructed of durable white plastic, this part measures approx. 22" L x 2" W. To install, you must snap the shelf into brackets at both ends to secure it to the refrigerator’s door. Helpful Tip: This design of this item may differ slightly from the original part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Door Shelf Bar• No tools required for installation Read More Read Less

Whirlpool Jenn-Air KitchenAid Maytag Roper Admiral Sears Kenmore Norge Magic Chef Amana Refrigerator Electronic Control Board W10789107We are a Factory Authorized Parts Distri ...butor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

This Gas Range Pressure Regulator and Safety Valve controls the gas supply for the bake and broil burners in your oven. Once this valve senses the desired heat, it will open u ...p and allow the gas to travel to the oven burner. If you are no longer getting heat to the burners, you may need to replace the valve. Installing this part will require specialized tools, complicated disassembly of the oven and prior repair experience. We recommend that you hire a qualified technician to install this assembly. If installing yourself, remember to unplug the oven or shut off the house circuit breaker and gas valve for the appliance before beginning.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Pressure Regulator and Safety Valve• Tools Needed: Specialized Tools Read More Read Less

This Refrigerator Door Handle End Cap Kit is chrome and includes both the upper and lower door handle caps for freezers and fresh food compartment handles. If your door does n ...ot close or open properly, this kit may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Door Handle End Cap Kit, Chrome• No tools required for installation Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This SxS Refrigerator Door Gasket is on the inner door panel of your freezer and creates a seal around the door to prevent warm air from entering the refrigerator. If this gas ...ket is worn out, cold air will leak out of the freezer. As a result, the freezer may run longer in an attempt to cool down, or frost may accumulate. Replacing it may alleviate these issues. This gasket is black and designed to be used with compatible side-by-side refrigerators. To remove any creases or wrinkles from the new gasket, set it in the sun or hot water for a few minutes. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Door Gasket• Tools Needed: Multi screwdriver Read More Read Less

WP3380854 Whirlpool Door Latch Bolt

This Dryer Timer controls the electrical components of the appliance and duration of its drying cycles. If any of the contacts in your appliance’s timer have burned out, or ...if the motor inside the unit shorted out and the timer is no longer functioning, you can easily replace the assembly with this part. This timer does not include the control knob, but you can purchase it separately (Item-WPW10711289). Note that this issue is often misdiagnosed; refer to the Repair Help section on the Whirlpool Parts website for additional repair information. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Timer• Tools Needed: Multi screwdriver Read More Read Less

This Dishwasher Touchpad and Control Panel houses the selection buttons and display for the dishwasher. The functions controlled by this panel include cycle intensity, drying ...options and the delayed start feature. This part is black in color and specifically designed to be used with black dishwasher models. You may need to replace this panel if the current display on your appliance isn’t responding properly or the buttons are broken and no longer functional. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Touchpad and Control Panel• Tools Needed: Multi screwdriver Read More Read Less

CNTRL-ELEC

This Gas Range Surface Igniter provides spark to the burner to ignite the gas and initiate the cooking process. This igniter features a spark electrode with a male spade conne ...ction. If your range’s igniter is no longer providing a spark to light the burner, the wire may be shorted out or the porcelain casing may be cracked, indicating that the part will need to be replaced. Installing this part will require basic hand tools, some disassembly of the oven and novice repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Surface Igniter• Tools Needed: Multi screwdriver and a piece of wood or other item to hold open the top of the range Read More Read Less

This Range Terminal Block connects the house power to the range wire harness. The Terminal Block is located in the back of the oven behind the access cover. When disconnecting ... the wires to the old Terminal Block, make note of how they're connected for mounting the new block. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Electric Range Power Cord (item 211052). 4-ft 40 Amp 3 wire w/closed eyelets & strain relief.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Terminal Block• Tools Needed: Multi screwdriver Read More Read Less

The SxS Refrigerator Defrost Heater melts frost from the evaporator of the appliance throughout the automatic defrost cycle that occurs during normal operation. If the evapora ...tor is freezing up and affecting the performance of the refrigerator, replacing the defrost heater may alleviate this issue. Remove the shelving and the rails in your freezer to gain access to the part behind the back panel. Installing this part will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Consider replacing the Defrost Thermostat (item WP4387490) at the same time you complete this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Defrost Heater• Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

The Range Bake Burner Assembly keeps your oven heating properly. To access and remove the old oven burner assembly, take out the oven racks, bottom oven panel and flame spread ...er. Make sure, when disconnecting the wires from the old assembly, not to let them fall back into the oven wall. The igniter for this model is included and is not sold separately. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also be sure to shut off the oven's gas supply.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Bake Burner Assembly• Tools Needed: Multi screwdriver Read More Read Less

The Gas Range Surface Burner Igniter Clip holds the surface burner igniter in place. If the existing clip in your appliance is broken and no longer holding the igniter properl ...y, replacing this part may alleviate the issue. To access the part, remove your burner grates, burners and burner caps. Then remove the burner screws. Use a putty knife under the stove top to release the locking clips holding it in place and then lift up the top of the range. Each clip is sold separately. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure you shut off the gas to the range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Surface Burner Igniter Clip• Tools Needed: Multi screwdriver, channel locks, needle nose pliers, putty knife Read More Read Less

WP2202807W is an original equipment manufactured (OEM) part. Enhance the functionality of your refrigerator with the durable handle designed for a seamless fit in various mode ...ls. This handle is crafted by Whirlpool, ensuring top-notch quality that meets the standards of several compatible brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. It serves as a reliable replacement, making it easier to open and close your refrigerator without hassle. Ideal for DIY repairs, this product streamlines the restoration process of your appliance, allowing for quick and efficient replacements. Perfect for maintaining the sleek look of your refrigerator while improving its usability, this handle is a must-have for any household. Maintain your appliance today for a better experience. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and will need replacement. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. Installing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply before you begin. Required Accessory: You will need to reuse the brass fitting from the existing part with the new valve or purchase a new one (item W10685193) if the old one doesn’t fit; use pipe joint compound to securely attach the fitting to the new part. Recommended Item: The Dishwasher Drain Pan (item 1021760) slides underneath the appliance and diverts any water leak to the front of the dishwasher.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver, 5/8" wrench Read More Read Less

W11549931-includeCORE is an original equipment manufactured (OEM) part. Maintain your refrigerator's performance with the W11549931 electronic control board, a vital component ... designed to ensure optimal functionality. This circuit board is compatible with a wide range of brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool. Engineered for durability, the W11549931 enhances temperature regulation, ensuring your food stays fresh longer. Installation is straightforward, allowing you to restore your appliance quickly. Ideal for both DIY enthusiasts and professional technicians, this part is essential for maintaining the reliability of your refrigerator. Choose this electronic control board for a seamless fit and improved efficiency in your appliance. Rest assured you're investing in quality with Whirlpool’s trusted standards. Read More Read Less

The Range Temperature Control Thermostat establishes and maintains the internal temperature of the oven cavity. If you're noticing issues with your oven temperature staying co ...nstant, replacing this part may alleviate the issue. To access the part, you'll remove the top panel of the range, the racks inside the range and the oven door. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Temperature Control Thermostat• Tools Needed: Multi screwdriver, putty knife Read More Read Less