Online Sale!
100% Guaranteed Genuine Parts
WPW10460919 Whirlpool Top
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 37.767800 lbs
Dimension : 31.440000 x 5.820000 x 28.690000
Compatible Brands
About this product
This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.
Weight : 37.767800 lbs
Dimension : 31.440000 x 5.820000 x 28.690000
The following parts are replaced by this product
- W10460919
No more associated models for this part.
Replacing the WD28X10284 GE Lower Rack and Roller Assembly
1. Unplug your dishwasher from the power supply.
2. If you have a built-in dishwasher, detach the face plate on the front panel and remove the screws that hold it in place.
3. Pull out the dishwasher and locate the lower rack wheels. These are usually located beneath the lowest rack.
4. Remove the old WD28X10284 GE Lower Rack and Roller Assembly by unscrewing the screws that secure it to the dishwasher frame.
5. Place the new WD28X10284 GE Lower Rack and Roller Assembly in the same position as the old one and securely fasten the screws.
6. If you have removed the faceplate in step 2, reattach it to the front of the dishwasher.
7. Reconnect the power supply and run the dishwasher through a cycle to ensure everything is working properly.
8. Enjoy your freshly replaced WD28X10284 GE Lower Rack and Roller Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your dishwasher from the power supply.
2. If you have a built-in dishwasher, detach the face plate on the front panel and remove the screws that hold it in place.
3. Pull out the dishwasher and locate the lower rack wheels. These are usually located beneath the lowest rack.
4. Remove the old WD28X10284 GE Lower Rack and Roller Assembly by unscrewing the screws that secure it to the dishwasher frame.
5. Place the new WD28X10284 GE Lower Rack and Roller Assembly in the same position as the old one and securely fasten the screws.
6. If you have removed the faceplate in step 2, reattach it to the front of the dishwasher.
7. Reconnect the power supply and run the dishwasher through a cycle to ensure everything is working properly.
8. Enjoy your freshly replaced WD28X10284 GE Lower Rack and Roller Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review