WPW10237499 Whirlpool Door Boot Seal
This Front Load Washer Door Boot Seal is a part that safely contains the water in between the tub and the front panel of your front-load washer. If your current door bellow is damaged and leaking water, replacing this part may alleviate the issue. Note that overloading the washer is the most common cause for a damaged or torn door boot. This part is gray in color and designed to be used specifically with stainless steel models. Replacing this seal will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Boot Seal
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Boot Seal
• Tools Needed: Multi screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Front Load Washer Door Boot Seal is a part that safely contains the water in between the tub and the front panel of your front-load washer. If your current door bellow is damaged and leaking water, replacing this part may alleviate the issue. Note that overloading the washer is the most common cause for a damaged or torn door boot. This part is gray in color and designed to be used specifically with stainless steel models. Replacing this seal will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Boot Seal
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Door Boot Seal
• Tools Needed: Multi screwdriver
Write Your Own Review
The following parts are replaced by this product
- W10237499
1. Unplug the washer before beginning.
2. Disconnect the hot and cold water supply lines from the rear of the washer.
3. Take off the two screws that are located on the top right and left side of the front panel.
4. Pull the panel away from the washer and set it aside.
5. Locate the clamps on either side of the rubber bellow and remove them.
6. Pull the old bellow out and discard it.
7. Slide the new WPW10237499 Whirlpool Washer Door Bellow in place, making sure that the bead edge is facing inside the machine.
8. Secure the new bellow to the washer with the clamps.
9. Reattach the front panel with the two screws.
10. Reconnect the hot and cold water supply lines.
11. Plug the washer back in and turn it on to make sure that the door bellow works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Disconnect the hot and cold water supply lines from the rear of the washer.
3. Take off the two screws that are located on the top right and left side of the front panel.
4. Pull the panel away from the washer and set it aside.
5. Locate the clamps on either side of the rubber bellow and remove them.
6. Pull the old bellow out and discard it.
7. Slide the new WPW10237499 Whirlpool Washer Door Bellow in place, making sure that the bead edge is facing inside the machine.
8. Secure the new bellow to the washer with the clamps.
9. Reattach the front panel with the two screws.
10. Reconnect the hot and cold water supply lines.
11. Plug the washer back in and turn it on to make sure that the door bellow works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
