WPW10195622 Whirlpool Stop
The Dishwasher Upper Dishrack Stop Clip ensures your appliance’s dishrack assembly doesn’t slide in too far and hit the rear wall of the cabinet during use. If your dishwasher's current clips are broken or damaged and no longer properly stopping the upper rack, you can easily replace them with this item. The stop clip is light gray in color and measures approximately 1-1/4" W. Installing this accessory will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Stop Clip
• Tools Needed: Flat-blade screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Stop Clip
• Tools Needed: Flat-blade screwdriver
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dishwasher Upper Dishrack Stop Clip ensures your appliance’s dishrack assembly doesn’t slide in too far and hit the rear wall of the cabinet during use. If your dishwasher's current clips are broken or damaged and no longer properly stopping the upper rack, you can easily replace them with this item. The stop clip is light gray in color and measures approximately 1-1/4" W. Installing this accessory will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Stop Clip
• Tools Needed: Flat-blade screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Stop Clip
• Tools Needed: Flat-blade screwdriver
Write Your Own Review
The following parts are replaced by this product
- W10195622
Replacing the WPW10195622 Whirlpool Stop Switch
1. Unplug your appliance and shut off the water supply to the appliance.
2. Remove the top panel of the washing machine by unscrewing the two screws at the back of the machine using a screwdriver.
3. Locate the old stop switch and disconnect the two wires connected to it.
4. Take out the old switch and replace it with the new switch.
5. Reconnect the two wires to the new switch and secure them with wire nuts.
6. Mount the new switch in place and fasten it with the screws.
7. Replace the top panel of the washing machine.
8. Plug your appliance into the wall outlet and turn on the water supply.
9. Test the switch to make sure it works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your appliance and shut off the water supply to the appliance.
2. Remove the top panel of the washing machine by unscrewing the two screws at the back of the machine using a screwdriver.
3. Locate the old stop switch and disconnect the two wires connected to it.
4. Take out the old switch and replace it with the new switch.
5. Reconnect the two wires to the new switch and secure them with wire nuts.
6. Mount the new switch in place and fasten it with the screws.
7. Replace the top panel of the washing machine.
8. Plug your appliance into the wall outlet and turn on the water supply.
9. Test the switch to make sure it works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
