WPW10134795 Whirlpool Burner

Step 1: Unplug your stove from the wall socket and turn off the breaker that controls the oven.

Step 2: Remove the top grates and any other objects on the burner surface of your range.

Step 3: Locate the screws that hold the control panel down. This can usually be found on either side of the control knobs, or directly behind the control knobs. Use a Phillips-head screwdriver to remove those screws.

Step 4: Remove the control panel. Carefully lift it up and off and set aside.

Step 5: Now locate the screws that secure the burner box in place. Use a Phillips-head screwdriver to loosen these screws.

Step 6: Once the screws have been loosened, use a pair of needle-nose pliers to carefully remove the wires connected to the old burner box.

Step 7: Now you can remove the old burner box. Place the new burner box in its place and secure it with the screws you removed earlier.

Step 8: Use the needle-nose pliers to reconnect the wires to the new burner box. Make sure the connections are secure.

Step 9: Replace the control panel and secure it with the screws you removed in step 3.

Step 10: Turn the power to the oven back on and plug it back into the wall socket. Make sure the burner works properly.

Step 11: Replace the grates and any other objects that you removed earlier.

You have now successfully replaced the Whirlpool WPW10134795 BURNER box.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.