Online Sale!
100% Guaranteed Genuine Parts
WP8544742 Whirlpool Dryer Blower Belt
The Dryer Blower Belt connects the drive motor pulley and the blower pulley to turn the blower wheel inside the appliance. If your dryer won't heat up properly, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Blower Belt
• Tools Needed: Flat-blade screwdriver, putty knife, 5/16" nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Blower Belt
• Tools Needed: Flat-blade screwdriver, putty knife, 5/16" nut driver
Weight : 0.241300 lbs
Dimension : 6.692900 x 6.062900 x 0.826700
Compatible Brands
About this product
The Dryer Blower Belt connects the drive motor pulley and the blower pulley to turn the blower wheel inside the appliance. If your dryer won't heat up properly, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Blower Belt
• Tools Needed: Flat-blade screwdriver, putty knife, 5/16" nut driver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Blower Belt
• Tools Needed: Flat-blade screwdriver, putty knife, 5/16" nut driver
Weight : 0.241300 lbs
Dimension : 6.692900 x 6.062900 x 0.826700
The following parts are replaced by this product
- 8544742
No more associated models for this part.
1. Unplug your dryer from the power outlet. This is an important safety precaution to prevent electric shock.
2. Go to the back of your dryer and remove the screws or bolts that hold the access panel in place. This will allow you access to the belt area.
3. Remove the old WP8544742 Whirlpool Dryer Blower Belt by slipping the belt off the motor pulley and then gently lifting it out. Once the belt is removed, inspect it for wear and tear.
4. Place the new WP8544742 Whirlpool Dryer Blower Belt onto the motor pulley. Make sure that the belt is properly aligned and that the tension is snug.
5. Reinstall the access panel by securing it in place with the screws or bolts that were removed earlier.
6. Plug the dryer back into the power outlet and test it out to make sure the belt is running smoothly.
7. If everything is running properly, you are done! Congratulations on replacing the WP8544742 Whirlpool Dryer Blower Belt.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Go to the back of your dryer and remove the screws or bolts that hold the access panel in place. This will allow you access to the belt area.
3. Remove the old WP8544742 Whirlpool Dryer Blower Belt by slipping the belt off the motor pulley and then gently lifting it out. Once the belt is removed, inspect it for wear and tear.
4. Place the new WP8544742 Whirlpool Dryer Blower Belt onto the motor pulley. Make sure that the belt is properly aligned and that the tension is snug.
5. Reinstall the access panel by securing it in place with the screws or bolts that were removed earlier.
6. Plug the dryer back into the power outlet and test it out to make sure the belt is running smoothly.
7. If everything is running properly, you are done! Congratulations on replacing the WP8544742 Whirlpool Dryer Blower Belt.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review