Online Sale!
100% Guaranteed Genuine Parts
WP7406P438-60 Whirlpool Bake Element
This Range Oven Lower Bake Element is a replacement part that provides constant heat from the lower oven when cooking. If your oven does not bake properly, check to see if there is a burned-out section of the element and replace if needed. 2585 watt. 240 volt. Element measures 16-3/8" W x 15-1/4" L. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Weight : 7.874100 lbs
Dimension : 21.940000 x 2.820000 x 17.690000
Compatible Brands
About this product
This Range Oven Lower Bake Element is a replacement part that provides constant heat from the lower oven when cooking. If your oven does not bake properly, check to see if there is a burned-out section of the element and replace if needed. 2585 watt. 240 volt. Element measures 16-3/8" W x 15-1/4" L. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Oven Lower Bake Element
• Tools Needed: Multi screwdriver
Weight : 7.874100 lbs
Dimension : 21.940000 x 2.820000 x 17.690000
The following parts are replaced by this product
- 74011047
- 7406P438-60
No more associated models for this part.
Replacing the Whirlpool WP7406P438-60 Element- Bottom
1. Unplug your appliance from the power outlet before beginning any work.
2. Remove the screws from the back panel of the stove.
3. Carefully remove the old element from the bottom of the stove. You may need to use a putty knife or other flat-tipped tool to loosen the element from the bracket.
4. Disconnect the wires from the old element and set aside the screws.
5. Take the new element and place it in the same position as the old one.
6. Connect the wires from the new element and secure the screws.
7. Reattach the back panel of the stove.
8. Replace the screws in the back panel and finish tightening them.
9. Reconnect the power outlet and turn on the stove.
10. Test the stove to make sure the new element is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your appliance from the power outlet before beginning any work.
2. Remove the screws from the back panel of the stove.
3. Carefully remove the old element from the bottom of the stove. You may need to use a putty knife or other flat-tipped tool to loosen the element from the bracket.
4. Disconnect the wires from the old element and set aside the screws.
5. Take the new element and place it in the same position as the old one.
6. Connect the wires from the new element and secure the screws.
7. Reattach the back panel of the stove.
8. Replace the screws in the back panel and finish tightening them.
9. Reconnect the power outlet and turn on the stove.
10. Test the stove to make sure the new element is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review