WP3149404 Whirlpool Surface Element Switch
Part #: WPL WP3149404
Whirlpool - KichenAid - Sears Kenmore - Roper Range Cook Top 6 in. Burner Switch 3149404
● Switch is CW
● "HI" is one click clockwise from "OFF"
● 15/16 in. shaft w/ breakoff at 5/8 in.
● 5.2 - 6.6 Amps
● Replaces part# 314144
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
● Switch is CW
● "HI" is one click clockwise from "OFF"
● 15/16 in. shaft w/ breakoff at 5/8 in.
● 5.2 - 6.6 Amps
● Replaces part# 314144
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool - KichenAid - Sears Kenmore - Roper Range Cook Top 6 in. Burner Switch 3149404
● Switch is CW
● "HI" is one click clockwise from "OFF"
● 15/16 in. shaft w/ breakoff at 5/8 in.
● 5.2 - 6.6 Amps
● Replaces part# 314144
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
● Switch is CW
● "HI" is one click clockwise from "OFF"
● 15/16 in. shaft w/ breakoff at 5/8 in.
● 5.2 - 6.6 Amps
● Replaces part# 314144
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- 3149404
- 310179
- 311847
- 311856
- 311857
- 314144
- 3148951
DIY Home Maintenance: Replacing the Whirlpool WP3149404 Switch
Replacing a faulty switch is a relatively easy home maintenance task that can be done without the help of an electrician or professional. The following instructions will guide you through replacing the Whirlpool WP3149404 switch in your home.
1. First, locate the switch and turn off the power to it. To ensure that you don’t get shocked or suffer any other damage, make sure that the power is off before you start working on the switch.
2. Once the power has been turned off, remove the screws holding the switch in place. This may require a flathead screwdriver.
3. Pull the old switch out from the wall box. Make sure to note how the wiring was connected to the old switch before removing it.
4. Connect the black wires to the two outer brass coloured screws on the new switch and the white wires to the two inner silver coloured screws. Tighten the screws securely.
5. Put the switch into the wall box, lining up the mounting holes, and secure it with the screws.
6. Turn the power back on and test the switch to make sure it is working properly.
You have now successfully replaced the Whirlpool WP3149404 switch in your home. If you experience any difficulty during this process, make sure the power is turned off before seeking the help of a qualified electrician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a faulty switch is a relatively easy home maintenance task that can be done without the help of an electrician or professional. The following instructions will guide you through replacing the Whirlpool WP3149404 switch in your home.
1. First, locate the switch and turn off the power to it. To ensure that you don’t get shocked or suffer any other damage, make sure that the power is off before you start working on the switch.
2. Once the power has been turned off, remove the screws holding the switch in place. This may require a flathead screwdriver.
3. Pull the old switch out from the wall box. Make sure to note how the wiring was connected to the old switch before removing it.
4. Connect the black wires to the two outer brass coloured screws on the new switch and the white wires to the two inner silver coloured screws. Tighten the screws securely.
5. Put the switch into the wall box, lining up the mounting holes, and secure it with the screws.
6. Turn the power back on and test the switch to make sure it is working properly.
You have now successfully replaced the Whirlpool WP3149404 switch in your home. If you experience any difficulty during this process, make sure the power is turned off before seeking the help of a qualified electrician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
