Online Sale!
100% Guaranteed Genuine Parts
W11545334 Whirlpool Upper Spray Arm Assembly
Whirlpool W11545539 GASKET We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 7.112300 lbs
Dimension : 24.527500 x 7.755900 x 5.196800
Compatible Brands
About this product
Whirlpool W11545539 GASKET We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 7.112300 lbs
Dimension : 24.527500 x 7.755900 x 5.196800
The following parts are replaced by this product
- W11174340
No more associated models for this part.
DIY Manifold Replacement for Whirlpool W11545334
1. Unplug the refrigerator from the wall to safely disconnect power and shut off the water supply.
2. Remove screws from the base of the refrigerator to gain access to the rear panel.
3. Carefully pull the panel away from the refrigerator and locate the manifold assembly on the far left side.
4. Unscrew and remove manifold bolts that hold the manifold in place.
5. Attach new manifold to the same location and secure it with the same screws you previously removed.
6. Reconnect the waterline and make sure it is properly connected.
7. Put the panel back onto the refrigerator and secure it with the screws.
8. Plug the refrigerator back into the wall and turn on the water supply.
9. Test the new manifold by running water through the dispenser and checking for any leaks.
10. Once all is dry, enjoy the newly installed manifold.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the wall to safely disconnect power and shut off the water supply.
2. Remove screws from the base of the refrigerator to gain access to the rear panel.
3. Carefully pull the panel away from the refrigerator and locate the manifold assembly on the far left side.
4. Unscrew and remove manifold bolts that hold the manifold in place.
5. Attach new manifold to the same location and secure it with the same screws you previously removed.
6. Reconnect the waterline and make sure it is properly connected.
7. Put the panel back onto the refrigerator and secure it with the screws.
8. Plug the refrigerator back into the wall and turn on the water supply.
9. Test the new manifold by running water through the dispenser and checking for any leaks.
10. Once all is dry, enjoy the newly installed manifold.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review