Online Sale!
100% Guaranteed Genuine Parts
W11544663 Whirlpool Control Knob
Whirlpool W11544663 KNOB We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.066300 lbs
Dimension : 2.874000 x 1.811000 x 1.771600
Compatible Brands
About this product
Whirlpool W11544663 KNOB We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.066300 lbs
Dimension : 2.874000 x 1.811000 x 1.771600
The following parts are replaced by this product
- W10850031
No more associated models for this part.
Replacing the Whirlpool W11544663 KNOB
DIY Guide
1. Before attempting to replace the knob on your Whirlpool W11544663 oven, make sure that the power source is disconnected and the oven has had time to cool down.
2. Use a flathead screwdriver to remove the existing knob by prying the metal retaining clips that secure the knob to the control panel. Lift the knob straight off the control panel once all of the clips have been removed.
3. Place the new knob onto the stem shaft of the control panel and make sure it's properly aligned.
4. Secure the new knob in place using the metal retaining clips. Reinstall any other components such as the protective plate that was previously attached to the old knob.
5. Reconnect the power source to the oven. Test the new knob to ensure it is working properly.
Congratulations! You’ve successfully installed your new Whirlpool W11544663 knob.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Guide
1. Before attempting to replace the knob on your Whirlpool W11544663 oven, make sure that the power source is disconnected and the oven has had time to cool down.
2. Use a flathead screwdriver to remove the existing knob by prying the metal retaining clips that secure the knob to the control panel. Lift the knob straight off the control panel once all of the clips have been removed.
3. Place the new knob onto the stem shaft of the control panel and make sure it's properly aligned.
4. Secure the new knob in place using the metal retaining clips. Reinstall any other components such as the protective plate that was previously attached to the old knob.
5. Reconnect the power source to the oven. Test the new knob to ensure it is working properly.
Congratulations! You’ve successfully installed your new Whirlpool W11544663 knob.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review