100% Guaranteed Genuine Parts
W11396038 Whirlpool Door Shelf Bin
Whirlpool W11396038 BIN . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 5.882800 lbs
Dimension : 15.511800 x 7.480300 x 7.047200
Compatible Brands
About this product
Whirlpool W11396038 BIN . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 5.882800 lbs
Dimension : 15.511800 x 7.480300 x 7.047200
The following parts are replaced by this product
- 2266150
- 2265126
- WP2265126
- WP2266150
- W10908848
No more associated models for this part.
DIY Instructions for Replacing the Whirlpool W11396038 BIN MOVABLE
Replacing a bin movable on a Whirlpool W11396038 refrigerator is a fairly simple process that can be done within minutes. Before beginning, make sure that you have all the necessary tools and parts needed for the job. You will need a Philips head screwdriver and your new replacement bin movable.
Step 1: Locate the Bin Movable
The bin movable is located on the right-hand side of the bottom of the refrigerator. It is usually connected to the door shelf rails.
Step 2: Remove the Old Bin Movable
Using your Philips head screwdriver, remove any screws that are holding the bin movable in place. Once the screws have been removed, carefully lift the bin movable out of its place.
Step 3: Insert the New Bin Movable
Take your new bin movable and fit it into the same place where you removed the old one. Make sure it is properly aligned and secure it with the screws that you previously removed.
Step 4: Test the Bin Movable
Once you have replaced the bin movable, test it by opening and closing the door to make sure that it is able to move freely. If there is any resistance, you may need to adjust the screws or re-align the bin movable.
Now that you have successfully replaced your Whirlpool W11396038 bin movable, you can now enjoy your new fridge with a functioning part!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a bin movable on a Whirlpool W11396038 refrigerator is a fairly simple process that can be done within minutes. Before beginning, make sure that you have all the necessary tools and parts needed for the job. You will need a Philips head screwdriver and your new replacement bin movable.
Step 1: Locate the Bin Movable
The bin movable is located on the right-hand side of the bottom of the refrigerator. It is usually connected to the door shelf rails.
Step 2: Remove the Old Bin Movable
Using your Philips head screwdriver, remove any screws that are holding the bin movable in place. Once the screws have been removed, carefully lift the bin movable out of its place.
Step 3: Insert the New Bin Movable
Take your new bin movable and fit it into the same place where you removed the old one. Make sure it is properly aligned and secure it with the screws that you previously removed.
Step 4: Test the Bin Movable
Once you have replaced the bin movable, test it by opening and closing the door to make sure that it is able to move freely. If there is any resistance, you may need to adjust the screws or re-align the bin movable.
Now that you have successfully replaced your Whirlpool W11396038 bin movable, you can now enjoy your new fridge with a functioning part!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review