W11159068 Whirlpool Transmission

DIY Instructions for Replacing the Whirlpool W11159068 GEARCASE (DW1)

Tools Needed:
- Phillips head screwdriver
- Socket wrench set
- Pliers
- Towel

Step 1: Disconnect power and water to the dishwasher.

Step 2: Remove the lower access panel from the dishwasher by unscrewing the four Phillips head screws and then sliding the panel off.

Step 3: Remove the spray arm by unscrewing the nut that holds it in place.

Step 4: Remove the top access panel by unscrewing the four Phillips head screws located on the corners of the panel.

Step 5: Unscrew the three screws that hold the gearcase in place and remove the gearcase.

Step 6: Place the new gearcase in position and secure with the three screws.

Step 7: Reinstall the top access panel and spray arm.

Step 8: Reinstall the lower access panel and ensure it is secure with the four Phillips head screws.

Step 9: Restore power and water to the dishwasher and test for proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.